Print Page | Close Window

variable speed control on m2 gleaner

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=135964
Printed Date: 27 Jul 2025 at 3:25pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com


Topic: variable speed control on m2 gleaner
Posted By: fescue first
Subject: variable speed control on m2 gleaner
Date Posted: 08 Mar 2017 at 11:08am
variable speed on my m2 does not work all the time and I don't know how to fix it. the unload auger works when it wants too.   help



Replies:
Posted By: darrel in ND
Date Posted: 08 Mar 2017 at 12:05pm
Any other quirks, like volt Guage jumping around, or lights not working during the time that VS and auger aren't working. ...? Darrel


Posted By: fescue first
Date Posted: 08 Mar 2017 at 12:20pm
not sure on the lights I have taken the hydro apart and cleaned them sometime it helps but not all the time


Posted By: fescue first
Date Posted: 08 Mar 2017 at 12:22pm
volt meter stays around 12 after about an hour the battery goes dead


Posted By: MACK
Date Posted: 08 Mar 2017 at 12:35pm
Bad switch, bad solenoid on valve, bad connection in wiring. Does it always slow down, or is it only speeding up?   MACK


Posted By: fescue first
Date Posted: 08 Mar 2017 at 12:48pm
speeding up


Posted By: MACK
Date Posted: 08 Mar 2017 at 9:09pm
If it always slows down, check #1 solenoid, and wire going to it. Could even be in switch. To speed up, switch has to send current to #! and #? (nor sure of #) to speed up. To slow down current is only sent to #?.   MACK


Posted By: fescue first
Date Posted: 09 Mar 2017 at 8:32am
thanks



Print Page | Close Window

Forum Software by Web Wiz Forums® version 11.10 - http://www.webwizforums.com
Copyright ©2001-2017 Web Wiz Ltd. - https://www.webwiz.net