Farm Equipment - WD 3 bolt front axle bolster

Print Page | Close Window

WD 3 bolt front axle bolster

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=135584
Printed Date: 07 Nov 2025 at 5:38am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: WD 3 bolt front axle bolster

Posted By: coggonobrien
Subject: WD 3 bolt front axle bolster
Date Posted: 27 Feb 2017 at 3:28pm

Anybody have a template to burn a replacement bolster plate?

Replies:

Posted By: coggonobrien
Date Posted: 28 Feb 2017 at 7:43am

I'm just looking for a picture with dimensions

Posted By: Lon(MN)
Date Posted: 02 Mar 2017 at 7:49am

Are you looking for the three bolt pivot? I have new ones made up.

Posted By: coggonobrien
Date Posted: 02 Mar 2017 at 8:18am

Lon,

I've got access to a laser at work and worked a trade with a local to build him a new pivot in exchange for a pair of fendors for my d15. So I was just hoping to find a drawing with dimensions so I could laser him one quick. Turns out he told me wrong, its a four bolt tractor he needs. The pivot is completely egged out from loader use. Worse case we may fill the hole and drill it back out. If somebody has a detailed print or drawing they would be willing to share that would be awesome. I'm not looking to mass produce as I can't do that but a one off part isn't a big deal to get done.

Posted By: Allis dave
Date Posted: 02 Mar 2017 at 11:00am

I have a 3 bolt not a 4. When I redid my front end a few years ago, I think there was kind of a smooth nut for the front pivot. I had it cut off and welded on a new one. then I drilled and tapped for a grease fitting. I'm having trouble not mixing up my memory with the front and back support, but I know I redid both.

Posted By: coggonobrien
Date Posted: 02 Mar 2017 at 11:37am

Do you guys know what diameter the bin is? I measured at 1.25" but it wasn't perfectly round.

Posted By: Lon(MN)
Date Posted: 02 Mar 2017 at 6:23pm

The four bolt ones I have I removed the square piece on the back side, welded the hole and made a new square piece for the back. Then drilled in a new hole. The four bolt bracket has two tapered holes for mounting so it would be a bit harder to make up a new four bolt plate.