Farm Equipment - Hiniker cab wiring on 180

Print Page | Close Window

Hiniker cab wiring on 180

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=135421
Printed Date: 14 Oct 2025 at 2:01pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: Hiniker cab wiring on 180

Posted By: ksbowman
Subject: Hiniker cab wiring on 180
Date Posted: 23 Feb 2017 at 5:36pm

I have a 180 with a Hiniker cab and the wiring was torn off at some point in time. At the rear the wiring harness enters both sides and was torn apart. I had assumed the main feed would go into the frame work in the front and then run through the frame. Now after looking further I'm not to sure the main wiring didn't come in from the rear and "Y" off both ways, as the only wire at the front I believe feeds a hot to the heater blower. Can anyone shed some light on it for me?

Replies:

Posted By: shameless (ne)
Date Posted: 23 Feb 2017 at 8:51pm

a buddy had a year-a-round cab that the wiring went up thru the rear framework tubes, and I think they then spread out across the cab roof inside towards the front for various things. the wires inside were covered by the cab interior foam and vinyl.