Farm Equipment - Need a measurement

Print Page | Close Window

Need a measurement

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=135319
Printed Date: 07 Nov 2025 at 5:38am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: Need a measurement

Posted By: SFSutton
Subject: Need a measurement
Date Posted: 21 Feb 2017 at 5:36am

What is the outside width of the engine frame on a D-14 and WD? Which is wider?

Thanks

-------------
D-14

Replies:

Posted By: Calvin Schmidt
Date Posted: 21 Feb 2017 at 7:53pm

Not home to check

-------------
Nothing is impossible if it is properly financed

Posted By: Unit3
Date Posted: 21 Feb 2017 at 10:09pm

Is a D14 and D15 the same?

-------------
2-8070FWA PS/8050PS/7080/7045PS/200/D15-II/2-WD45/WD/3-WC/UC/C

Posted By: DrAllis
Date Posted: 22 Feb 2017 at 7:26am

D-15 and D-17 are the same---- D-14 is narrower by 1 to 2 inches. WD is closer to D-15/17 at about 19?? inches.

Posted By: SFSutton
Date Posted: 22 Feb 2017 at 7:37am

Thanks, that is exactly what I wanted to know...

Take care

-------------
D-14

Posted By: DiyDave
Date Posted: 22 Feb 2017 at 6:12pm

D-14 is close to 2" narrower. I bought a 14 with a loader, the loader was shimmed with 2 1X6's, under the front frame rail brackets. Took loader off, and mounted it to D-15, fit like a charm...

Posted By: Hyperpack
Date Posted: 22 Feb 2017 at 9:36pm

WD is 19 1/4 inches wide. I will check D14 tomorrow

Posted By: SFSutton
Date Posted: 23 Feb 2017 at 3:23am

Thank you for the measurement, I'm all set with the infor already presented. Thanks again for your efforts.

Steve

-------------
D-14

Posted By: Joe(TX)
Date Posted: 25 Feb 2017 at 6:31pm

I measured my D14 and it was 17 1/2 inches.

-------------
1970 190XT, 1973 200, 1962 D-19 Diesel, 1979 7010, 1957 WD45, 1950 WD, 1961 D17, Speed Patrol, D14, All crop 66 big bin, 180 diesel, 1970 170 diesel, FP80 forklift. Gleaner A

Posted By: SFSutton
Date Posted: 28 Feb 2017 at 2:55am

Thank you.

-------------
D-14