Farm Equipment - 180 allis Chalmers questions

Print Page | Close Window

180 allis Chalmers questions

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=135252
Printed Date: 15 May 2024 at 6:52pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: 180 allis Chalmers questions

Posted By: keith wd
Subject: 180 allis Chalmers questions
Date Posted: 19 Feb 2017 at 1:33pm

Working on putting 180 back together and trying to get the troque tube back to the transmission and trying to get the bushing to slide back into the hi and lo and the tractor will not go back together all the way what could I be doing wrong the bushing will not go into the hi and lo even with force?

Replies:

Posted By: SteveM C/IL
Date Posted: 19 Feb 2017 at 6:59pm

was this bushing replaced?seems I remember about that having to be "sized"after installation

Posted By: keith wd
Date Posted: 19 Feb 2017 at 7:05pm

Yes was replaced how did you size it?

Posted By: MACK
Date Posted: 19 Feb 2017 at 10:12pm

It is a bearing so no resizing.

Make sure PTO is not stopping it. Make sure piglet bearing did not come apart.

How much does it lack going togather? MACK

Posted By: Lonn
Date Posted: 20 Feb 2017 at 7:12am

piglet bearing? Never heard that term before. Is that the needle bearing?

-------------
-- --- .... .- -- -- .- -.. / .-- .- ... / .- / -- ..- .-. -.. . .-. .. -. --. / -.-. .... .. .-.. -.. / .-. .- .--. .. ... -
Wink
I am a Russian Bot

Posted By: MACK
Date Posted: 20 Feb 2017 at 8:12am

Big fingers, little keys= piglet PILOT. MACK

Posted By: Lonn
Date Posted: 20 Feb 2017 at 8:32am

Ah, I thought I was out of the loop on something LOL

-------------
-- --- .... .- -- -- .- -.. / .-- .- ... / .- / -- ..- .-. -.. . .-. .. -. --. / -.-. .... .. .-.. -.. / .-. .- .--. .. ... -
Wink
I am a Russian Bot

Posted By: DrAllis
Date Posted: 20 Feb 2017 at 8:48am

Never replace the brass bushing in the front end of the power director clutch. It has to be machined to a specific size after installation.

Posted By: DougG
Date Posted: 20 Feb 2017 at 9:07am

Get some long bolts and help pull it together,, gently, if there is alot of resistance stop and check things out

Posted By: WF owner
Date Posted: 20 Feb 2017 at 4:46pm

I, personally, would never pull one together with bolts. I have used longer bolts as pilot bolts, to hold everything straight, but I wouldn't pull it together.

Posted By: MACK
Date Posted: 20 Feb 2017 at 9:00pm

Tie down straps work pretty good pulling one togather. Hook battery up and bump it once in a while. MACK