Farm Equipment - 190xt pto question

Print Page | Close Window

190xt pto question

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=135221
Printed Date: 07 Nov 2025 at 10:47am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: 190xt pto question

Posted By: rudyk
Subject: 190xt pto question
Date Posted: 18 Feb 2017 at 5:18pm

I have a steady drip coming from my pto output.
I have ordered the new seal, what is the best way to remove the old one, and how can I tell if its a shaft which can be reversed from 540 to 1000 rpm
If it cannot be switched, can a different shaft be purchased to make it 1000
Thanks for the help

Replies:

Posted By: MACK
Date Posted: 18 Feb 2017 at 9:22pm

If it has three bolts on seal housing, it is 540 only.

No you cannot buy a different shaft to make it 1000, needs a lot more parts.

If it is 540, drain rear end remove three bolts, remove seal hosing and replace seal and orang..

When I was in the shop, I kept a seal housing. Could just switch housings with out draining oil. MACK