Farm Equipment - D10 Steering Gear rebuild NEED HELP

Print Page | Close Window

D10 Steering Gear rebuild NEED HELP

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=135190
Printed Date: 07 Nov 2025 at 6:31am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: D10 Steering Gear rebuild NEED HELP

Posted By: Macon Rounds
Subject: D10 Steering Gear rebuild NEED HELP
Date Posted: 17 Feb 2017 at 6:31pm

I have a D10 with a steering gear/ box that needs new bearings. Worm gear and sector gear are good. Just needs new bearings.

My current challenge is removing the TUBE that coverers the steering wheel shaft from the steering gear box.

AGCO parts book does not give a good photo of this area and I do not have a D10 service manual.

Any help would be appreciated from someone who has experience with these gear boxes.

Thanks in advance

-------------
The Allis "D" Series Tractors, Gravely Walk behind Tractors, Cowboy Action Shooting !!!!!!! And Checkmate

Replies:

Posted By: Macon Rounds
Date Posted: 21 Feb 2017 at 11:02am

BT

-------------
The Allis "D" Series Tractors, Gravely Walk behind Tractors, Cowboy Action Shooting !!!!!!! And Checkmate

Posted By: wbecker
Date Posted: 21 Feb 2017 at 11:52am

To remove the steering tube, remove the steering wheel, remove the clamp at the base of the tube and slide the tube up off the steering shaft.

-------------
Allis B, IB, Low B, G, D10, JD M, 8KCAB, C152