Farm Equipment - b front pulley help

Print Page | Close Window

b front pulley help

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=135042
Printed Date: 18 Oct 2025 at 2:40am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: b front pulley help

Posted By: phillip t
Subject: b front pulley help
Date Posted: 13 Feb 2017 at 7:19pm

Hey guys, Phil again. I have tried everything that was mentioned for me to try, heat, beating,penetrating fluid,and now have the puller on it as tight as i can get it. I checked to make sure it didnt have another set screw and it didnt. I dont know what to do. Any thoughts appreciated. Phil

Replies:

Posted By: phillip t
Date Posted: 13 Feb 2017 at 7:34pm

If i break this pulley how hard are they to find and how expensive. Phil

Posted By: DSeries4
Date Posted: 13 Feb 2017 at 8:14pm

I was able to get a brand new (aftermarket) one for my D14 around 5 years ago for $75. If not, I am sure some of the vendors here could help you out.

-------------
'49 G, '54 WD45, '55 CA, '56 WD45D, '57 WD45, '58 D14, '59 D14, '60 D14, '63 D15D, '66 D15II, '66 D21II, '67 D17IV, '67 D17IVD, '67 190XTD, '73 620, '76 185, '77 175, '84 8030, '85 6080

Posted By: BenGiBoy
Date Posted: 14 Feb 2017 at 8:33am

I have a extra (used) one.

Here is one, without hand crank parts..... http://www.yesterdaystractors.com/70236741_Crankshaft-Pulley_4757.htm?gclid=CMWE7qjfj9ICFd6Kswod6JIJRg" rel="nofollow - A-C pulley, b,c,ca, d 14, etc....

-------------
'39 Model B
Tractors are cheaper than girls, remember that!