190XT Exhaust
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=135006
Printed Date: 20 Sep 2025 at 5:25pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: 190XT Exhaust
Posted By: DSeries4
Subject: 190XT Exhaust
Date Posted: 12 Feb 2017 at 8:51pm
|
I am getting ready to take my hood to the body shop in the next few weeks to get fixed up. One thing I would like to know from anyone that has one, does your exhaust pipe rest against the right side of the hood like mine? This picture shows the old rusty pipe (coming off the original Rayjay turbo) against the side of the hood... http://s526.photobucket.com/user/szalmyr/media/190XT/DSC03886_zpsjffk6kzj.jpg.html" rel="nofollow">  With my new A&I turbo and exhaust pipe, it is still in the same place... http://s526.photobucket.com/user/szalmyr/media/190XT/DSC04508_zpszldjtnmm.jpg.html" rel="nofollow">  I tried moving the turbo and elbow around, but nothing worked (without putting the pipe at a wild angle). Is there any way to move the hood around? I would prefer to not have to cut the hood. Any thoughts to get this pipe centered? ------------- '49 G, '54 WD45, '55 CA, '56 WD45D, '57 WD45, '58 D14, '59 D14, '60 D14, '63 D15D, '66 D15II, '66 D21II, '67 D17IV, '67 D17IVD, '67 190XTD, '73 620, '76 185, '77 175, '84 8030, '85 6080 |
Replies:
Posted By: gerkendave
Date Posted: 13 Feb 2017 at 7:01am
| I had the same problem with mine but the previous owner just bent the hood into a lip around the one edge of the pipe... Looked horrible. I flattened his " fix" and then proceeded to make a relief cut for the pipe. Probably not the exact perfect fix but in my opinion it looks much cleaner than what was there and mine is just for work not show. Good luck! |
Posted By: AC7060IL
Date Posted: 13 Feb 2017 at 11:00am
|
If yours is like my 190 XTD, the exhaust/turbo heat cooks the hoods right side decals. Someday when I restore it, I'll see if anything can be done to slide the hot things to their left which may eliminate cooking the decal. If that is not a possibility, then maybe the following procedure may apply.  |
Posted By: Joe(TX)
Date Posted: 13 Feb 2017 at 11:23am
|
Is it possible that the tractor has the wrong exhaust elbow? ------------- 1970 190XT, 1973 200, 1962 D-19 Diesel, 1979 7010, 1957 WD45, 1950 WD, 1961 D17, Speed Patrol, D14, All crop 66 big bin, 180 diesel, 1970 170 diesel, FP80 forklift. Gleaner A |
Posted By: Ed (Ont)
Date Posted: 13 Feb 2017 at 5:13pm
| Make that hole a bit bigger. Then cut a round ring to fit as exact as you want and pop rivet in place. Will look good. |