Farm Equipment - Trip bucket loader cylinder packing

Print Page | Close Window

Trip bucket loader cylinder packing

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=134942
Printed Date: 07 Nov 2025 at 8:18am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: Trip bucket loader cylinder packing

Posted By: Lon(MN)
Subject: Trip bucket loader cylinder packing
Date Posted: 11 Feb 2017 at 1:02pm

Looking for the part number for the cylinder packing/seals that go in a model 100 trip bucket loader that fits a WD45. Power up gravity down. The type I have is the four bolt flange bolted to a threaded cast end. Would like to see if AGCO has this or else it's off to the hydraulic shop.

Replies:

Posted By: stu(ON)
Date Posted: 11 Feb 2017 at 1:26pm

Lon, check your e-mail.
stu

Posted By: stu(ON)
Date Posted: 11 Feb 2017 at 1:40pm

Found the site where the manual is available. It had disappeared at one point. Appreciate that the site is available again.

http://www.grandpastractor.com/forum/allis-chalmers-equipment.html" rel="nofollow - http://www.grandpastractor.com/forum/allis-chalmers-equipment.html

Posted By: Albert
Date Posted: 11 Feb 2017 at 8:19pm

72000653 I think they are not serviced by AGCO any more

Posted By: Dakota Dave
Date Posted: 12 Feb 2017 at 12:10pm

I got seals from AGCO little over a year ago. I think I paid around $12 per set. I had to wait a couple days to get the second set.

Posted By: Ted J
Date Posted: 13 Feb 2017 at 9:18am

Got mine from Sandy Lake a couple of years ago..... Don't remember what I paid, but they were cheap.

-------------
"Allis-Express"
19?? WC / 1941 C / 1952 CA / 1956 WD45 / 1957 WD45 / 1958 D-17

Posted By: Lon(MN)
Date Posted: 14 Feb 2017 at 4:54pm

Agco says not available anymore. Went to the hydraulic store and there they were. Set me back $15.00.

Posted By: corbinstein
Date Posted: 16 Feb 2017 at 6:47am

SANDY LAKE.