D14 Seat Repair
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=134911
Printed Date: 06 Nov 2025 at 6:51pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: D14 Seat Repair
Posted By: john(MI)
Subject: D14 Seat Repair
Date Posted: 10 Feb 2017 at 11:43am
|
I searched but no luck. I remember someone posting pics of the parts they used to rebuild their D14 seat. I should have saved it, but I didn't so does anyone have the post or information. Mines been sitting in the shed and I thought I could take the seat off and redo it while it's still winter. Thanks, John
------------- D14, D17, 5020, 612H, CASE 446 |
Replies:
Posted By: Dale Hardtke
Date Posted: 10 Feb 2017 at 11:54am
| Call Bill Deppe 563 652 2949 |
Posted By: DSeries4
Date Posted: 10 Feb 2017 at 9:55pm
|
Drive out all the roll pins and pound out the worn shafts - lots of heating, oiling, hammering, cursing and swearing will be required. Getting everything apart is the hardest part. After that, I get my local fab shop to put in all new bushings fix the wallowed out holes, and make new shafts out of stainless steel - they don't rust and they will last forever. Put everything back together and you are all set. I have done it to 4 tractors already. The seats are as good as new after that.
------------- '49 G, '54 WD45, '55 CA, '56 WD45D, '57 WD45, '58 D14, '59 D14, '60 D14, '63 D15D, '66 D15II, '66 D21II, '67 D17IV, '67 D17IVD, '67 190XTD, '73 620, '76 185, '77 175, '84 8030, '85 6080 |
Posted By: jaybmiller
Date Posted: 11 Feb 2017 at 6:21am
|
gee DS4, I've got 4 more you could..heat,hammer,curse....at !! lol.. Every winter it's the 'project' I never get around to doing.... sigh maybe this Summer... Jay ------------- 3 D-14s,A-C forklift, B-112 Kubota BX23S lil' TOOT( The Other Orange Tractor) Never burn your bridges, unless you can walk on water |
Posted By: DSeries4
Date Posted: 11 Feb 2017 at 9:30am
Heck, I've got 4 more of my own that I still have to do. They all have to wait their turn! I gotta say, I have had some come apart really easy but those a very rare occasions! ------------- '49 G, '54 WD45, '55 CA, '56 WD45D, '57 WD45, '58 D14, '59 D14, '60 D14, '63 D15D, '66 D15II, '66 D21II, '67 D17IV, '67 D17IVD, '67 190XTD, '73 620, '76 185, '77 175, '84 8030, '85 6080 |
jaybmiller wrote:Posted By: john(MI)
Date Posted: 11 Feb 2017 at 11:46am
|
What shock do you use?
------------- D14, D17, 5020, 612H, CASE 446 |
Posted By: Kenny L.
Date Posted: 11 Feb 2017 at 3:19pm
| Call Bill Deppe |