turbos
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=134867
Printed Date: 06 Nov 2025 at 2:31pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: turbos
Posted By: JPG AUSTRALIA
Subject: turbos
Date Posted: 09 Feb 2017 at 8:24am
|
ok turbo gurus,the r62 needs a new turbo(not rebuildable) and the turbo shops all want $2500 to 3000 for one here.I have seen a lot of holsets the same on ebay I can get shipped in as low as $500 but none have the same part number.Mine is a hx40w with a 3535617 number.The closest number to mine I have found is a 3538215 ,they all look identical on ebay apart from that last number.Is there much difference or can the waste gate be adjusted to suit my application. thanks for any replies.
|
Replies:
Posted By: DrAllis
Date Posted: 09 Feb 2017 at 8:35am
|
I'd be thinking looking at one from a similar year/similar HP/similar RPM Case/IH Cummins combine engine. You are talking Cummins, right ??
|
Posted By: JPG AUSTRALIA
Date Posted: 09 Feb 2017 at 8:52am
|
yes talking 8.3 cummins,not sure if the case/cummins are the same turbo or not.I know those engines are slightly different to the real cummins as I needed an injector line last year and the 2388 I tried to get one of at the wreckers was not like mine at all.Unfortunatly there are not many r62 wrecks to pick from and when there is they want to sell the motors complete.
|
Posted By: shameless (ne)
Date Posted: 09 Feb 2017 at 8:58am
|
maybe someone here in the states can get you one and ship it to you a lot cheaper than what they cost you there?
|
Posted By: Don(MO)
Date Posted: 09 Feb 2017 at 9:19am
Get the ser#, model # and CPL# off your engine call your Cummins dealer with the INFO and get a price and part # then start looking for that part number.
-------------
3 WD45's with power steering,G,D15 fork lift,D19, W-Speed Patrol, "A" Gleaner with a 330 corn head,"66" combine,roto-baler, and lots of Snap Coupler implements to make them work for their keep.
|
Posted By: TramwayGuy
Date Posted: 09 Feb 2017 at 11:13am
Check this out....
http://www.invasionautoproducts.com/turbo-industrial-cummins-tc-hx40w-3535617.html
Or just the rotating parts:
https://www.amazon.com/TKParts-Cartridge-3535324-4027612-Cummins/dp/B01LWYY9HQ
|
Posted By: randy
Date Posted: 09 Feb 2017 at 12:23pm
Check with Inpumped. He got one for my 8.3. Matched the numbers.
-------------
CA WD WD45 D17 D17 Diesel 7060 8050 8070
|
Posted By: JPG AUSTRALIA
Date Posted: 09 Feb 2017 at 5:44pm
|
Thanks for the replies,🙂
|
|