Ertl Precision Models
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=134822
Printed Date: 06 Nov 2025 at 2:31pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: Ertl Precision Models
Posted By: Ken McGregor
Subject: Ertl Precision Models
Date Posted: 08 Feb 2017 at 1:54pm
|
Did the Ertl Prercision WD 45 wfe have a pulley? I have been looking for one but would like to have a pulley. Was the WD model available in wfe? and Did it have a pulley? regards, Ken McGregor |
Replies:
Posted By: RickM(MO)
Date Posted: 08 Feb 2017 at 2:43pm
|
I have an Ertl Precision WD 45 Wide Front. It does not have a belt pulley. I don't know about the WD models, as far as wide front or pulley. ------------- Missouri Allis Chalmers Club Member; 1954 WD45 (NF), 611LTD & 811GT Lawn Tractors |
Posted By: norm[ind]
Date Posted: 08 Feb 2017 at 7:21pm
| never seen a belt pulley on any A-C TOYS UNLESS THEY WEREEE CUSTOM BUILT |
Posted By: CrestonM
Date Posted: 08 Feb 2017 at 7:43pm
| Ertl Farmall M's have a pulley, so I wonder why an A-C wouldn't. |
Posted By: HaroldOmaha
Date Posted: 08 Feb 2017 at 8:38pm
| My steel wheeled WC has a pulley, and my WD 45 D has a pulley, both precisions . |
Posted By: jiminnd
Date Posted: 08 Feb 2017 at 8:58pm
|
Not sure of any of this, don't know about pulleys, I don't think they ever made a WD wide front, have looked for one for years, could always find WD45s. Wanted a WD cause that is what I have. ------------- 1945 C, 1949 WF and WD, 1981 185, 1982 8030, unknown D14(nonrunner) |
Posted By: Bill Long
Date Posted: 08 Feb 2017 at 9:09pm
|
The Belt Pulleys were not standard equipment on a WD, WD-45, the B, C, and all the D series tractors. On those models the belt pulley was an option. The Belt Pulleys were standard equipment on the WC and CA tractors. Good Luck! Bill Long
|
Posted By: JoeO(CMO)
Date Posted: 08 Feb 2017 at 9:14pm
|
I have a Precision WD45 Diesel with a belt pulley ------------- |
Posted By: Bill Long
Date Posted: 08 Feb 2017 at 9:26pm
A belt pulley could be purchased as an option for any of the tractors that did not have them as standard equipment. Good Luck! Bill Long
|
JoeO(CMO) wrote:Posted By: Mikez
Date Posted: 08 Feb 2017 at 11:20pm
| I think I have a ertl D-17 with a belt pulley. Ill have to see if I can find it. |
Posted By: Todd AL
Date Posted: 09 Feb 2017 at 10:13am
|
Allis Chalmers Ertl Precisions: #1 WC NF on steel #2 WD Narrow front, distillate exhaust #3 WD45 Wide front gas #6 D17 NF #7 WD45 diesel NF #8 D17 with mounted New Idea picker #11 WD45 gas NF 50th anniversary edition The skips in the numbers were Oliver 77's and a Massey Harris 44 It would be nice to have a WD 3 bolt wide front, a Series 4 D17 WF, and possibly some 170/175 versions as well, but Ertl has pretty much given up on Allis in general, and the original Precision series has evolved into Key Precision and now ELITE. |
Posted By: irlbeck A-C'S
Date Posted: 09 Feb 2017 at 12:13pm
|
Here is the 45D belt pulley. The Series 4 wf is not precision but is still nice.   ------------- B,C,CA,(2)WC's,(4)WD's,(2) WD45'S, 45Diesel, (2)D12'S Series 2, D12 Hiclear,(2)D12 Series 3, HD3, D17NF (3)D17 Series 4 Diesels, M-100 Grader,8550,A few Lawn tractors lots of other AC stuff |
Posted By: Ted J
Date Posted: 09 Feb 2017 at 4:11pm
|
Craig, from the picture, it looks like that WD45 front tire is loose from the rim? PURDY!! Both of em!
------------- "Allis-Express" 19?? WC / 1941 C / 1952 CA / 1956 WD45 / 1957 WD45 / 1958 D-17 |
Posted By: Dans 7080
Date Posted: 09 Feb 2017 at 4:17pm
| That's just the plastic they put on all precision series tractors Ted. |
Posted By: Fred in Pa
Date Posted: 10 Feb 2017 at 6:17am
  The RC & 3 WC 's have pulleys ,some of my D series have them ------------- He who dies with the most toys is, nonetheless ,still dead. If all else fails ,Read all that is PRINTED. |
Posted By: jiminnd
Date Posted: 10 Feb 2017 at 10:43am
|
Not precision, I think just Ertl, but my D 15 has a pulley, my 1/8 scale WC doesn't have a pulley. ------------- 1945 C, 1949 WF and WD, 1981 185, 1982 8030, unknown D14(nonrunner) |