B Allis bearing question
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=134732
Printed Date: 06 Nov 2025 at 3:56pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: B Allis bearing question
Posted By: Sandknob
Subject: B Allis bearing question
Date Posted: 06 Feb 2017 at 11:48am
|
Guys, I am in need of a bearing number and race number for a bearing in the transmission of my 38 B. It is the rear bearing/race on the upper shaft in the transmission. Thanks for any help. Adam http://s164.photobucket.com/user/sandknob2001/media/IMG_20170205_224217959_zps7j14pugb.jpg.html" rel="nofollow"> 
|
Replies:
Posted By: Don(MO)
Date Posted: 06 Feb 2017 at 1:23pm
|
Go to AGCO's part's site and find the part numbers and take the Allis part numbers to NAPA and get the bearings. Or just call AGCO and get the right bearings from them. Looks like your trans was on found at the bottom of the lake after twenty years down there, a lot of cleaning is in order. lol ------------- 3 WD45's with power steering,G,D15 fork lift,D19, W-Speed Patrol, "A" Gleaner with a 330 corn head,"66" combine,roto-baler, and lots of Snap Coupler implements to make them work for their keep. |
Posted By: Dick L
Date Posted: 06 Feb 2017 at 1:25pm
| Look up Sandy Lake Implement phone in the advertisers here and ask for Brenda or bill and they will fix you up without the numbers. Both know these old tractor parts inside and out. |
Posted By: Sandknob
Date Posted: 06 Feb 2017 at 1:40pm
| Don, it was actually pretty clean when I started on this project in 2007!!!! It's been open since then sitting in my barn with the disappearing roof. Every windstorm we get more of the roof disappears. Lol! Yep, it definitely needs cleaned! |