Farm Equipment - C A Hand Clutch?

Print Page | Close Window

C A Hand Clutch?

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=133953
Printed Date: 16 Jun 2025 at 3:56pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: C A Hand Clutch?

Posted By: Gary(MO)
Subject: C A Hand Clutch?
Date Posted: 18 Jan 2017 at 12:45pm

Guys. I have the final drive off my CA and the hand clutch pack is stuck in it. Any ideas on how to get it out. Does it take a special puller or what? This is first one I have had stuck in housing. TIA Gary

Replies:

Posted By: DennisA (IL)
Date Posted: 18 Jan 2017 at 12:47pm

Should just pull right off.

-------------
Thanks & God Bless

Dennis

Posted By: Gary(MO)
Date Posted: 18 Jan 2017 at 10:11pm

Dennis A. I know it should pull out easy but this one is stuck on axle shaft.

Posted By: AJ
Date Posted: 18 Jan 2017 at 10:33pm

Could be rusted on. Might have to provoke it.

I did have one have a stick stuck in between the pack and the housing but didn't put up a very big fight.

-------------
Can't fix stupid

Posted By: DennisA (IL)
Date Posted: 18 Jan 2017 at 10:41pm

Put some penetrating oil on and let sit. Tap on it with a hammer a few times and let sit. Repeat as needed.

-------------
Thanks & God Bless

Dennis

Posted By: GregLawlerMinn
Date Posted: 19 Jan 2017 at 9:31am

Patience and persistence is the key. Panther Pi$$ and tapping work on some. Have got some by using long pry bars thru the windows. Have also used a large flat chisel as a "wedge" between the axle shoulder and back of the clutch. Once out clean up the outer axle with Emory Paper and "dress up" the key

-------------
What this country needs is more unemployed politicians-and lawyers.
Currently have: 1 D14 and a D15S2.
With new owners: 2Bs,9CAs,1WD,2 D12s,5D14s,3D15S2s, 2D17SIVs,D17D,1D19D;1 Unstyled WC

Posted By: Gary(MO)
Date Posted: 19 Jan 2017 at 11:08am

Thanks guys. I have it soaking and hanging. I have a hook in clutch pack with weight of final drive on it. I tap with center punch(bar) several times a day. Hopeful this will get it loose. Thanks again. Gary