BRAKE LOCKING 200 ALLIS
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=133904
Printed Date: 18 Dec 2025 at 1:03am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: BRAKE LOCKING 200 ALLIS
Posted By: ac-mike
Subject: BRAKE LOCKING 200 ALLIS
Date Posted: 17 Jan 2017 at 8:16am
|
I HAVE A CUSTOMERS 200 ALLIS IN SHOP. CUSTOMER SAYS THE RIGHT BRAKE LOCKS UP AND HAVE TO ROCK IT TO GET IT TO RELEASE. THIS IS A LATER STYLE 200 BRAKE SET UP. USUALLY THIS IS CAUSED BY, OIL LEAK,OR PADS WORN OUT, OR DISTANCE BETWEEN INNER AND OUTER BRAKE DRUM PARTS BECOMES TO WIDE. THE EARLIER STYLE BRAKE SETUP IS SIMILAR TO 100 SERIES TRACTORS. SHOP MANUAL GIVES ALLOWABLE DIMISION BETWEEEN BRAKE DRUMS. MY SHOP MANUAL GIVES NO DIMISION BETWEEN BRAKE DRUM PLATES ON TRACTORS WITH THE NEWER STYLE BRAKES. SHOULD THIS BE A CONCERN? WHAT ELSE MIGHT CAUSE BREAK TO LOCK UP? BRAKE DISCS SHOW VERY LITTLE WEAR AND NO OIL LEAK. |
Replies:
Posted By: old farmer
Date Posted: 17 Jan 2017 at 10:37am
| Could be a problem in the rear end. Have seen this before on some tractors. |
Posted By: Tony Elo
Date Posted: 17 Jan 2017 at 12:59pm
| Is it the style of brakes like the 7000 have? Discs with ball bearings on a taper to push them out? if so,make sure where the ball bearings slide is smooth,also check them for any flat spots |
Posted By: Lynn Marshall
Date Posted: 17 Jan 2017 at 1:14pm
| My belief is that the splines get worn in the discs (sharp) and cause this problem. Look at that area closely. |
Posted By: Rhoadesy_65
Date Posted: 30 Jul 2019 at 7:12am
Do you remember what ended being the fix for this? Mine does have oil in one side, but the other is dry ------------- Farmin' with 1981 7010 PD, 1983 6080, 1983 8010, Gleaner R42 in Darke County OH |
ac-mike wrote: