Farm Equipment - Allis Torque Converter Gauge

Print Page | Close Window

Allis Torque Converter Gauge

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=133835
Printed Date: 06 Nov 2025 at 12:03am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: Allis Torque Converter Gauge

Posted By: orangeman
Subject: Allis Torque Converter Gauge
Date Posted: 15 Jan 2017 at 4:10pm

Guys:

Will need to replace the 2" torque converter gauge that goes in the dash to an AC 655 Crawler - Loader.

Not sure that the gauge is service part or no longer available?

Would be open to an aftermarket gauge as long as it fits the hole and can reach the torque converter housing.

I looked at a Case 455 Torque converter gauge and they appear to be very similar.

Any ideas on a replacement gauge are most appreciated!

Thanks Much.....

Orangeman

Replies:

Posted By: orangeman
Date Posted: 17 Jan 2017 at 4:17am

Think I solved this - Caterpillar offers one that is very similar to the original Converter Oil Temp Gauge in the 655.