Seat
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=133814
Printed Date: 16 Jun 2025 at 2:42pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: Seat
Posted By: gerkendave
Subject: Seat
Date Posted: 15 Jan 2017 at 8:45am
| What's everyone doing for a comfortable seat with decent back support on a 190 tractor? The seat the last owner put on this thing leaves little to be desired. |
Replies:
Posted By: DSeries4
Date Posted: 15 Jan 2017 at 8:49am
|
Rebuild the stock suspension and put new cushions on the original 3 piece seat pan.
------------- '49 G, '54 WD45, '55 CA, '56 WD45D, '57 WD45, '58 D14, '59 D14, '60 D14, '61 D15D, '66 D15II, '66 D21II, '67 D17IV, '67 D17IVD, '67 190XTD, '73 620, '76 185, '77 175, '84 8030, '85 6080 |
Posted By: gerkendave
Date Posted: 15 Jan 2017 at 8:56am
| Don't have any of the original seat pans. They were removed and replaced with what appears to be a lawn mower seat. It's the perfect height to dig into the lower back! |
Posted By: Hubert (Ga)engine7
Date Posted: 15 Jan 2017 at 12:52pm
X2. I have the stock suspension on my D15 but the PO replaced the pan seat with one that is probably a lawn mower seat and way too narrow for my fit and trim rear end. It leaves a lot to be desired and plenty of overhang also. ------------- Just an old country boy saved by the grace of God. |
DSeries4 wrote:Posted By: oldways
Date Posted: 15 Jan 2017 at 1:39pm
|
I put a universal tractor seat with suspension adjustable base on my 190 a few years ago. I've been very pleased with it. I'll try to put a picture on here later. ------------- 1 Corinthians 1:18 1969-190xt-III. 1966 190xt gas. 1966 190xt Cab. 1948-G. 1937-WC unstyled. 1950-B. 1951-CA. 1966-D17-IV |
Posted By: gerkendave
Date Posted: 15 Jan 2017 at 1:58pm
| I would really appreciate it. Thank you |
Posted By: oldways
Date Posted: 15 Jan 2017 at 2:42pm
    ------------- 1 Corinthians 1:18 1969-190xt-III. 1966 190xt gas. 1966 190xt Cab. 1948-G. 1937-WC unstyled. 1950-B. 1951-CA. 1966-D17-IV |
Posted By: gerkendave
Date Posted: 15 Jan 2017 at 6:28pm
| Old ways, did that seat come with the adjustable base for that angle? |
Posted By: oldways
Date Posted: 15 Jan 2017 at 6:39pm
|
yes. Just like you see it. I had a piece of aluminum plate I used in between the seat frame and old seat bracket. For some reason. Can't exactly remember why. ------------- 1 Corinthians 1:18 1969-190xt-III. 1966 190xt gas. 1966 190xt Cab. 1948-G. 1937-WC unstyled. 1950-B. 1951-CA. 1966-D17-IV |
Posted By: oldways
Date Posted: 15 Jan 2017 at 6:39pm
|
I believe I bought the seat at Rural King ------------- 1 Corinthians 1:18 1969-190xt-III. 1966 190xt gas. 1966 190xt Cab. 1948-G. 1937-WC unstyled. 1950-B. 1951-CA. 1966-D17-IV |
Posted By: gerkendave
Date Posted: 15 Jan 2017 at 6:41pm
| Awesome thank you. That looks like a good replacement for everything. The stock suspension seems pricey to rebuild especially since I have nothing of the original seat left |
Posted By: shameless (ne)
Date Posted: 15 Jan 2017 at 7:27pm
| I puts a high back bucket seat out of a conversion van on 2 of my tractors! they also had fold up arm rests! |
Posted By: shameless (ne)
Date Posted: 15 Jan 2017 at 7:28pm
| don't puts a black seat on an open tractor or you'll cook your mountain oysters! |
Posted By: gerkendave
Date Posted: 15 Jan 2017 at 7:31pm
| Haha shameless, the cheapo seat on there now is black, I just keep an old shirt with me to sit on if the vinyl gets to be like a griddle! I'm in the process of getting a cab for the old girl so while I'm at it I'd like to do some sound deadening and a few other fixes along with a new seat to make baling a little more enjoyable! |
Posted By: oldways
Date Posted: 15 Jan 2017 at 7:38pm
|
Look on northerntool.com. A&I 5-position black seat model # W223BL ------------- 1 Corinthians 1:18 1969-190xt-III. 1966 190xt gas. 1966 190xt Cab. 1948-G. 1937-WC unstyled. 1950-B. 1951-CA. 1966-D17-IV |
Posted By: oldways
Date Posted: 15 Jan 2017 at 7:46pm
|
RuralKing.com SKU # 67060025 black talon seat. I think is the exact one I have. 89.99 ------------- 1 Corinthians 1:18 1969-190xt-III. 1966 190xt gas. 1966 190xt Cab. 1948-G. 1937-WC unstyled. 1950-B. 1951-CA. 1966-D17-IV |
Posted By: AC Orange 1
Date Posted: 15 Jan 2017 at 7:48pm
|
I have an original "3 piece seat pan (will need the seat cushions) as well as the rest of the seat assembly" if you're interested. I'm in Nebraska near Wahoo. ------------- 1937 (AC WC), 1952 (AC WD), 1957 (AC D17 SERIES 1), 1964 (AC D17 SERIES IV WITH FACTORY 3PT), 1970 (AC ONE-NINETY XT SERIES III), 1971 (AC ONE-EIGHTY) |
Posted By: oldways
Date Posted: 15 Jan 2017 at 7:50pm
|
They come in blue and yellow for shamlesse's oysters also. ------------- 1 Corinthians 1:18 1969-190xt-III. 1966 190xt gas. 1966 190xt Cab. 1948-G. 1937-WC unstyled. 1950-B. 1951-CA. 1966-D17-IV |
Posted By: shameless (ne)
Date Posted: 15 Jan 2017 at 9:47pm
| I can see if the seat in my old 7080 is still good |
Posted By: DrAllis
Date Posted: 16 Jan 2017 at 9:14am
| You know, John Deere made a really big deal about their "Posture seat" on the 4010/4020 era tractors, and I'll admit it was pretty nice. I have also run as many or more 190XT's with the Super deluxe white cushioned seat and always thought it was every bit as good as the Deere seat. The many hundreds of times I've gotten up on a Customers tractor and sat down on a worn out suspension and worn out seat cushions, I could never stand to operate one like that. How nice they are when they are up to shape OEM. |