190 trans rebuilding
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=133807
Printed Date: 20 Jun 2025 at 4:58pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: 190 trans rebuilding
Posted By: Ronnie
Subject: 190 trans rebuilding
Date Posted: 15 Jan 2017 at 3:36am
|
Ok so I was priceing out new pinion bearing at the dealer and was told that the bearings were 400.00 for the two of them. My question is there a cheaper route and does any one have part numbers for a cheaper route. O I forgot this is a two spider diff |
Replies:
Posted By: MACK
Date Posted: 15 Jan 2017 at 7:05am
| Is your bearing bad or just need adjusted? MACK |
Posted By: DougG
Date Posted: 15 Jan 2017 at 7:32am
| Get the name and number off the old ones and go to IBT or another bearing supplier may be able to get the same without a 500% markup , worth a try |
Posted By: Ronnie
Date Posted: 15 Jan 2017 at 8:50am
| The bearings are rusted from siting with out oil and one is bad |
Posted By: Acdiesel
Date Posted: 15 Jan 2017 at 5:58pm
|
NOT SURE WHAT YOUR SERIAL NUMBERS IS BUT, YOU CAN GET THESE BEARINGS FROM NAPA. THESE ARE FOR THE CARRIER BEARINGS (SUPPORT THE RING GEAR) AC #211169 NAPA # 387AVP $17.87 OR AC#244167 NAPA# BR45291 $39.16 THESES ARE THE PINION SHAFT BEARINGS: AC #223308 NAPA # BR3780 $26.92 IF YOU GO TO AGCOPARTSBOOK.COM YOU CAN FIND YOUR PART NUMBER AND I CAN TRY TO CROSS IT OR IF YOU CAN SEE THE NUMBERS ON THE OLD ONES YOU CAN TRY THOSES NUMBERS. DAN  ------------- D19 Diesel,D17 Diesel SER.3 2-D14, 2-D15 SER.II WF/NF D15 SER.2 DIESEL D12 SER.I, D10 Ser.II 2-720'S D21 Ser. II Gmc,caterpillar I'm a pharmacist (farm assist) with a PHD (post hole digger) |
Posted By: Ronnie
Date Posted: 15 Jan 2017 at 8:44pm
|
We are working on getting it apart. sofar it's slow not much spare time but we're getting it apart. Thanks for the info dan. |