cab radio
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=133801
Printed Date: 05 Nov 2025 at 5:29pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: cab radio
Posted By: navyrunfarm
Subject: cab radio
Date Posted: 14 Jan 2017 at 8:47pm
| anyone know of a good quality cab radio that would work well in my old steel cab on my 210 ?? any opinions appreciated! |
Replies:
Posted By: DanWi
Date Posted: 14 Jan 2017 at 9:09pm
| In my 190 I went to wally world and got a digital car radio 2 speakers and an antenna. It works good and didn't cost to much. |
Posted By: navyrunfarm
Date Posted: 14 Jan 2017 at 9:27pm
| i thought about doin that but wasnt sure if wiring would be a nightmare. i have done a couple of them in trucks but with the plug adapter ya just match the colors and splice and its pretty simple haha. wont have that convenience in tractor ha |
Posted By: CrestonM
Date Posted: 14 Jan 2017 at 10:28pm
| I'm about the world's worst when it comes to figuring out electrical systems, BUT,,,, I did wire up a radio on my Ford 8N (It's inside an old Allis-Chalmers fender radio case). I too got a cheap Wal Mart radio. There were a lot of wires coming out the back, and I didn't know what to do with them, so I ignored them. I just took the power wire and ran it to the battery, and ran a ground wire from the radio to the battery. Then I ran wires to my speaker, and plugged in the antenna. Really is super simple! |
Posted By: ZachD89
Date Posted: 14 Jan 2017 at 11:07pm
|
I would have to look at what we have in our tractor.. ------------- 37 A,37 Waukesha B,35 WC,38 WF,M crawler,49 WF,49 WD,53 WD45,39 and 40 RC,47 WC,41 B,39 B,48G,48,C,59D10,D21,IB,B10,B12,B208,B1,Roto Bale Loader, sp100 combine, allcrop 66, L3 Gleaner |
Posted By: shameless (ne)
Date Posted: 15 Jan 2017 at 4:50am
| a lot of the wires out the back of those are speaker wires....read the directions that come with the radio! lol |
Posted By: DougS
Date Posted: 15 Jan 2017 at 5:01am
This is true, but run the main heavy power wire directly to the battery, through a fuse. Run the lighter on/off power wire to your ignition switch. Doing it this way will keep your stations in the radio memory. |
shameless (ne) wrote: