Farm Equipment

Print Page | Close Window

190xt

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=133504
Printed Date: 14 Jun 2025 at 4:12am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: 190xt

Posted By: Bobo Husker
Subject: 190xt
Date Posted: 07 Jan 2017 at 3:44pm

Finally got transmission and rear all back together. Due to what it cost for parts, Im hoping for so input on cheap power.....such as different turbo, injector pump but no serious motor work this year.
1965 190xt

Thank you in advance!

Replies:

Posted By: Bobo Husker
Date Posted: 07 Jan 2017 at 4:25pm

Ive read an HX35 or HE351 would be a good turbo. It has the original roosa master pump. Also read a pump off of a 7060 would help.

Any thoughts and what type of HP this could creat?

Posted By: Carl(NWWI)
Date Posted: 07 Jan 2017 at 6:34pm

I'm going to put an hx35 on mine, it's a non wastegated turbo so it will look a little cleaner on it. Going to match it with a stock, but turned up pump and 7080 injector tips. Hoping for 150hp.

Why, I don't know. Why not? Lol.

Posted By: Bobo Husker
Date Posted: 07 Jan 2017 at 6:43pm

Yup read that on the injectors too. The pump really sounds interesting though also. Wondering if 150hp may even be low.

Posted By: Carl(NWWI)
Date Posted: 07 Jan 2017 at 7:02pm

At least I think it will be a stock 190 pump,

Injpumped is doing the pump and injectors for me when I get the engine back together.

Posted By: MACK
Date Posted: 07 Jan 2017 at 8:05pm

If you need 150hp, buy a 150hp tractor. Then you can enjoy the comforts of a later tractor and not be concerned about where the weakest link is in your 93hp tractor. MACK

Posted By: Bobo Husker
Date Posted: 07 Jan 2017 at 8:07pm

Hard to make Wright with factory 150 hp tractor.

Posted By: Bobo Husker
Date Posted: 07 Jan 2017 at 8:07pm

Weight

Posted By: Dakota Dave
Date Posted: 07 Jan 2017 at 8:08pm

If your going to run 150 hp through a 90 hp tractor your going to be in the transmition and rear end again.

Posted By: Bobo Husker
Date Posted: 07 Jan 2017 at 8:11pm

I should have clarified, this for pulling 6500# class.

Posted By: MACK
Date Posted: 07 Jan 2017 at 8:54pm

Then 150hp won't be no ways near enough. MACK

Posted By: Carl(NWWI)
Date Posted: 07 Jan 2017 at 11:16pm

MACK wrote:

If you need 150hp, buy a 150hp tractor. Then you can enjoy the comforts of a later tractor and not be concerned about where the weakest link is
in your 93hp tractor. MACK

Have a Versatile and IH 1486. So yes, I do have a 150+HP tractor. But I can still have a 150hp 190XT as a toy.

Tranny and pd have already been gone through. Won't be using it to plow 700 acres of hard clay every year. Heck, I'll be lucky to break 50 hours a year of use on it.

Posted By: rw
Date Posted: 08 Jan 2017 at 7:13am

150 HP might be enough depending on whose sand box you are playing in!!

Posted By: Dakota Dave
Date Posted: 08 Jan 2017 at 2:11pm

Good luck you may want to post down in the pulling forum they are knowledgable about pulling mods.