Farm Equipment - C front pedestal bushings

Print Page | Close Window

C front pedestal bushings

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=133487
Printed Date: 05 Nov 2025 at 7:38am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: C front pedestal bushings

Posted By: eighty nine
Subject: C front pedestal bushings
Date Posted: 06 Jan 2017 at 6:53pm

Does anyone know of a source for the two bushings in the front pedestal for the steering arm shaft? Obsolete from Agco.

Replies:

Posted By: norm[ind]
Date Posted: 06 Jan 2017 at 7:17pm

GET YOUR MEASUREMENTS --GO TO YOUR BRG SUPPLY HOUSE

Posted By: LaJaMe
Date Posted: 10 Jan 2017 at 11:50am

Not for a C, but I fixed my WD. I found a piece of pipe with both of the inside and outside diameters right. The bolt was still good. Cheap repair. Just takes some time. No slop anymore. Good luck

Posted By: saele
Date Posted: 10 Jan 2017 at 1:15pm

Also check with DJS Tractor Parts, 734-320-3470 or DJSTractorParts.com, they may have what you need.

Posted By: Matt (Jordan,MN)
Date Posted: 10 Jan 2017 at 5:11pm

I have 1 Nos bushing. Send me a pm if your still looking

-------------
Owner of Matt Scott LLC
Specializing in NOS and used Allis Chalmers tractor & implement parts & liturature and Magneto Repair
http://www.mattscottllc.com/

Posted By: eighty nine
Date Posted: 10 Jan 2017 at 7:38pm

Took it to local machine shop, they had bushings that will work. Thanks for the replies!