Farm Equipment - What 6 bolt hubs?

Print Page | Close Window

What 6 bolt hubs?

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=133299
Printed Date: 09 Jun 2025 at 12:14pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: What 6 bolt hubs?

Posted By: IBWD MIke
Subject: What 6 bolt hubs?
Date Posted: 02 Jan 2017 at 11:49am

Will work on a WD?

I have a nice set of 7.5L 15 tri ribs on 6 bolt rims I want to put on the front of my wide front 45. Need a set of hubs that will work.
http://s1378.photobucket.com/user/dlsledge51/media/100_0907_zpscnynpdpn.jpg.html" rel="nofollow">

Replies:

Posted By: Alberta Phil
Date Posted: 02 Jan 2017 at 12:38pm

I believe 6 bolt hubs from an early WC will fit on those spindles.

Posted By: littlemarv
Date Posted: 02 Jan 2017 at 2:04pm

I think so too. I took wheel bearings out of a WD and put them in the 6 bolt hubs on my WC.

-------------
The mechanic always wins.

B91131, WC23065, WD89101, CA29479, B1, Early B10, HB212, 416H

Posted By: dawntreader74
Date Posted: 02 Jan 2017 at 6:51pm

thank' the oliver 77 6 bolt hub will also work.

Posted By: IBWD MIke
Date Posted: 02 Jan 2017 at 7:23pm

Thanks for the ideas, any others?

Posted By: dawntreader74
Date Posted: 02 Jan 2017 at 7:32pm

have them tires mounted on your wd rims' would be less work' much cheeper.

Posted By: SteveM C/IL
Date Posted: 02 Jan 2017 at 10:40pm

dawntreader74 wrote:

have them tires mounted on your wd rims' would be less work' much cheeper.

I'm thinkin them rims are a bit wider than skinny WD's. I put some GM(Buick?)rims(15x6 I think) on my 45.Had to skin a little outa the center but not much.Think they are the same size as his...7.5L's

Posted By: Bill Deppe/AC Salvag
Date Posted: 02 Jan 2017 at 11:03pm

Have a set of WC 6 bolt hubs on my reverse WD, fitted on without making any changes

Posted By: jaybmiller
Date Posted: 03 Jan 2017 at 6:21am

I know GMC truck rims fit the CA rears. Had to flip them 'inside out' but it sure made moving it easier!

-------------
3 D-14s,A-C forklift, B-112
Kubota BX23S lil' TOOT( The Other Orange Tractor)

Never burn your bridges, unless you can walk on water

Posted By: IBWD MIke
Date Posted: 03 Jan 2017 at 12:21pm

They are 15" tires. I bought the rims from a coworker pretty reasonable, believe they came off a 4020. I painted them white because they may wind up on the 185 but would rather put them on the 45 if I can find the right hubs and put new 11L15s on the 185.

Posted By: michaelwis
Date Posted: 03 Jan 2017 at 12:40pm

We put 6 bolt hubs on our D15 many moons ago.
Got them from Tractor Supply in Madison

-------------
WD WD45 DIESEL D 14 D-15 SERIES 2 190XT TERRA TIGER ac allcrop 60 GLEANER F 6060 7040.and attachments for all Proud to be an active farmer

Posted By: Gerald J.
Date Posted: 03 Jan 2017 at 7:00pm

If you can find trade numbers for the bearings and exact dimensions on the spindles, its possible there might be a stock hub from Baum Hydraulics http://www.baumhydraulics.com" rel="nofollow - http://www.baumhydraulics.com or Shoup http://www.shoupparts.com" rel="nofollow - http://www.shoupparts.com

If you dig into the tapered roller bearings of the Baum catalog you will find that there are several cones and cups that have the same roller dimensions but sometimes a wide range of spindle and cup dimensions, so the critical dimension on the hub and spindles are more often the length between the places the bearings ride. Baum also sells seals, another variable.

I know one of the stock hubs that both of those places carry fit my AC plow when I broke the hub.

Gerald J.

Posted By: IBWD MIke
Date Posted: 04 Jan 2017 at 10:08am

Thanks for the ideas guys, much appreciated.