Wanted to buy:A.C. HD20 rear sprockets & rails
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Construction and other equipment
Forum Description: everything else with orange (or yellow) paint
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=133204
Printed Date: 31 Oct 2025 at 6:46pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: Wanted to buy:A.C. HD20 rear sprockets & rails
Posted By: headwrench
Subject: Wanted to buy:A.C. HD20 rear sprockets & rails
Date Posted: 30 Dec 2016 at 10:43am
| I am looking for A.C. HD20 rear sprockets & rails, new or good used or for whole parts machine Thanks |
Replies:
Posted By: Gordy
Date Posted: 30 Dec 2016 at 4:05pm
This 21 is still for sale call 2698325994 ------------- “If you can't explain it simply, you don't understand it well enough” |
Posted By: headwrench
Date Posted: 30 Dec 2016 at 4:23pm
| Thank you |
Posted By: Brent.eggers
Date Posted: 03 Jan 2017 at 11:54am
| I no a fella with good sprockets. But don't have rails |
Posted By: headwrench
Date Posted: 04 Jan 2017 at 8:11am
| Thank you How would I contact him? |
Posted By: DiyDave
Date Posted: 04 Jan 2017 at 5:41pm
look at the phone # above the picture?
If you wanna contact brent, send him a PM, through the site. Note this might not work, till you have the requisite # of posts, per site rules...
|
Posted By: Brent.eggers
Date Posted: 04 Jan 2017 at 8:12pm
| This is Brent Bob Wetzel Is the mans name he is in the Nebraska his # is 4026762057 I just bought some HD 20 stuff from him the other day I have two HD 20s I have one that either I'm going to parts out or fix up myself so I might even have some parts My number is 620778 2905 i'm in Kansas |
Posted By: headwrench
Date Posted: 04 Jan 2017 at 9:38pm
| Thank you Brent for the info I will do some calling |
Posted By: dpower
Date Posted: 05 Jan 2017 at 12:26am
| Bob Witzel is his name |
Posted By: Brent.eggers
Date Posted: 05 Jan 2017 at 6:38am
| Yes it is & I spelled it wrong I thought I sent that in a pm. Too but yes he's a great fello |
Posted By: ac_sd
Date Posted: 13 Jan 2017 at 8:44pm
| Early HD-21 rails should fit on an HD-20 .. Try John Parks at General Gear.. Phone 208-342-8911.. |
Posted By: headwrench
Date Posted: 13 Jan 2017 at 9:53pm
| I have tried General Gear They have nothing available Thank you for your help |
Posted By: DMiller
Date Posted: 14 Jan 2017 at 12:53pm
| Should be 9" pitch same as D8H or K, Komatsu D120/135 bushing diameter may be slightly different, would have to measure the inside/outside width of rails to see if will work on AC rollers. Could do a weld on Cat segment section from one of their sprockets to make it easier. |
Posted By: Ian Beale
Date Posted: 14 Jan 2017 at 4:45pm
|
This came up at Red Power " For the record go down to Rawleigh99 on page 12 and follow "Sprocket rim replacement D7 - D8 and posts following. From Cat. http://www.redpowermagazine.com/forums/topic/93000-td6-dozerloader/?page=12" rel="nofollow - http://www.redpowermagazine.com/forums/topic/93000-td6-dozerloader/?page=12 |
Posted By: headwrench
Date Posted: 14 Jan 2017 at 10:01pm
| Thank you for your help |