Construction and other equipment - Looking for parts for an M100B

Print Page | Close Window

Looking for parts for an M100B

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Construction and other equipment
Forum Description: everything else with orange (or yellow) paint
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=132965
Printed Date: 31 Oct 2025 at 4:57pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: Looking for parts for an M100B

Posted By: Puff
Subject: Looking for parts for an M100B
Date Posted: 23 Dec 2016 at 8:21am

Hi all,

I am new to this forum and have recently acquired an old M100B road grader in need of some TLC. I have been trying to find some parts; specifically a hydraulic filter (PN 70637666) and a break cable (PN70918951). They say the filter is no longer made and cross referencing a new filter seems to be an issue. I have tried MinnPar, Donaldson and FindItParts, but no luck. Does anyone have any idea where I might be able to get these? Any help would be greatly appreciated.

Replies:

Posted By: RelianceWorks
Date Posted: 24 Dec 2016 at 1:55pm

You got a couple of options. The filter you can take out and measure, than call Baldwin, or go to their website and try to come up with a filter for hydraulics that have the same or very close dimensions. If that fails your left with changing the canister to either another canister filter or a spin on, Baldwin can also get you the filter bases you need, or the canister, even a hydraulic place may be able to help you with a canister type filter.

Your brake cable is easier, go to your local catco dealer, they can make you a new one just bring them your old one, and they can match it.

Posted By: Puff
Date Posted: 26 Dec 2016 at 3:25pm

Thank you so much for the advice. I will give it a try.

Merry Christmas!!!

Mark