6070 Narrow Front - 1/16th Model
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=132915
Printed Date: 08 Jun 2025 at 11:10am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: 6070 Narrow Front - 1/16th Model
Posted By: Armand(AZ)
Subject: 6070 Narrow Front - 1/16th Model
Date Posted: 21 Dec 2016 at 8:58pm
|
A few weeks ago someone posted a picture of a 6070 converted to narrow front. I couldn't get it out of my head so bought a 6070 and converted it to narrow front. Just like the looks of it for some reason.... Merry Christmas!!!! Armand http://s270.photobucket.com/user/ACmodels/media/D19%20and%206070%20005%201600x1200.jpg.html" rel="nofollow"> 
|
Replies:
Posted By: James Coons
Date Posted: 21 Dec 2016 at 9:33pm
| Beautiful work!!! I like how it looks as well. |
Posted By: shameless (ne)
Date Posted: 21 Dec 2016 at 9:48pm
| now you need to mount a cultivator on it! |
Posted By: Auntwayne
Date Posted: 21 Dec 2016 at 10:02pm
|
Great post Armand, wasn't it one of Andrew's tractors ?
------------- Dad always said," If you have one boy, you have a man. If you have two boys, you have two boys". "ALLIS EXPRESS" |
Posted By: ILGLEANER
Date Posted: 21 Dec 2016 at 10:16pm
|
Looks good !!! ------------- Education doesn't make you smart, it makes you educated. |
Posted By: Mikez
Date Posted: 21 Dec 2016 at 11:11pm
| Yea that looks neat |
Posted By: Unit3
Date Posted: 21 Dec 2016 at 11:22pm
|
Great looking job. I'll ask the question, when something like this, that looks so handy for a farm, why did the nf get fazed out? It just looks so right. ------------- 2-8070FWA PS/8050PS/7080/7045PS/200/D15-II/2-WD45/WD/3-WC/UC/C |
Posted By: Charlie175
Date Posted: 22 Dec 2016 at 4:29am
When the easy adjust wide fronts came out there was no need for a narrow front. Plus the disadvantages of the narrow in muddy and rough conditions ------------- Charlie '48 B, '51 CA, '56 WD45 '61 D17, '63 D12, '65 D10 , '68 One-Ninety XTD |
Unit3 wrote:Posted By: Fred in Pa
Date Posted: 22 Dec 2016 at 7:04am
|
Looks GREAT ,Did you ever do a 7000 series . ------------- He who dies with the most toys is, nonetheless ,still dead. If all else fails ,Read all that is PRINTED. |
Posted By: farmtoybuilder
Date Posted: 22 Dec 2016 at 8:01am
|
Looks Great Armand! Did you use our spindle or your own? We just installed a narrow front on a 7000 body for a customer. But my camera is broke so I didn't get any pictures or it. He's suppose to send me some when he finish's it. As we just did narrow front install. Also put one on his G10000 MM. Will post pictures when we get some! ------------- 5 different TT-10's,5 TT-18's Terra Tigers,B-10,2 B-207's,B-110,2 B-112's,HB-112,B-210,B-212,HB212,2 Scamp's & Homilite T-10. Still hunting NICE HB-112 & anything Terra Tiger & Trailers for them. |
Posted By: Armand(AZ)
Date Posted: 22 Dec 2016 at 8:31am
|
Thanks for the comments!!! Shameless, you come up with good ideas at times!! LOL Jeff, I built the spindle. Problem with the 6000 series is that the steering shaft on the tractor is off center requiring gears for steering. Actually still engineering that. |
Posted By: injpumpEd
Date Posted: 22 Dec 2016 at 12:36pm
|
That really looks Sharp! ------------- 210 "too hot to farm" puller, part of the "insane pumpkin posse". Owner of Guenther Heritage Diesel, specializing in fuel injection systems on heritage era tractors. stock rebuilds to all out pullers! |
Posted By: REEDE
Date Posted: 22 Dec 2016 at 7:41pm
| Another master piece. |
Posted By: Sugarmaker
Date Posted: 22 Dec 2016 at 8:27pm
|
That is a very sharp model! It has just the right look! Regards, Chris ------------- D17 1958 (NFE), WD45 1954 (NFE), WD 1952 (NFE), WD 1950 (WFE), Allis F-40 forklift, Allis CA, Allis D14, Ford Jubilee, Many IH Cub Cadets, 32 Ford Dump, 65 Comet. |