Farm Equipment - 190xt gasser wiring

Print Page | Close Window

190xt gasser wiring

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=132790
Printed Date: 06 Jun 2025 at 7:43pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: 190xt gasser wiring

Posted By: tx091
Subject: 190xt gasser wiring
Date Posted: 18 Dec 2016 at 4:25pm

What size wire do I need for the starting circuit from temp guage to switch and from switch to starter?

Replies:

Posted By: DougS
Date Posted: 18 Dec 2016 at 4:43pm

Temp gauge isn't critical. I would go with #18 or better because of the added strength. #14 would work to the starter solenoid, but again I'd go with #12 or even #10 because the wire is stronger.

Posted By: MACK
Date Posted: 18 Dec 2016 at 9:40pm

I think you mean starter to switch. 10-12 gauge. Switch to temp gauge. 14-16 gauge. MACK

Posted By: tx091
Date Posted: 19 Dec 2016 at 7:15pm

Yup, Senelity setting in, I meant from the amp guage to the ignition, It has #8, I stayed with that. From the switch to the solenoid I went with #12. I disconnected the push button switch and ran right to the ignition switch which had the start detent in it. Works great. I would assume someone changed out the original switch. The push button looks factory with rubber cap over it. Why did they have a separate push button for the starter? Did I screw up by not using the push button?