Print Page | Close Window

7010 PD doesn't want to go into low range

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=132521
Printed Date: 06 Jun 2025 at 7:35pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com


Topic: 7010 PD doesn't want to go into low range
Posted By: Roscoe62
Subject: 7010 PD doesn't want to go into low range
Date Posted: 12 Dec 2016 at 11:59am
My 7010 PD won't go in to low range.  Just stays in neutral.  Sometimes by shifting a bunch between High and Low, it will finally catch.

Is this a cable problem, and is there an adjustment?

Thanks, 
Roscoe.



Replies:
Posted By: DrAllis
Date Posted: 12 Dec 2016 at 12:06pm
Probably the small side-shift cable is stiff/sticking. Adjust all you want, but replace the cable first.


Posted By: Roscoe62
Date Posted: 12 Dec 2016 at 12:12pm

And I just put the floor plate back on a few weeks ago.....

I don't have a parts book for this.  Can I find the part number on-line somewhere?

Thanks,
Roscoe


Posted By: injpumpEd
Date Posted: 12 Dec 2016 at 12:15pm
agco partsbooks online, sign in as a guest, and see everything.

-------------
210 "too hot to farm" puller, part of the "insane pumpkin posse". Owner of Guenther Heritage Diesel, specializing in fuel injection systems on heritage era tractors. stock rebuilds to all out pullers!


Posted By: Roscoe62
Date Posted: 12 Dec 2016 at 12:44pm
That did it!  By the small side cable, I assume that is the one on the bottom of the shifter?



Posted By: Lynn Marshall
Date Posted: 12 Dec 2016 at 6:30pm
Yes.


Posted By: tomNE
Date Posted: 12 Dec 2016 at 6:44pm
my heim joint split.   got mine back together and welded it.   cleaned threads and it works like new.   pull the floor pan, it will tell u the story

-------------
AC from the start of my families farming career till the end!


Posted By: Joe(TX)
Date Posted: 14 Dec 2016 at 1:35pm
I ended up cutting a hole in the floor plate and installed a shift lever for my 7010.

-------------
1970 190XT, 1973 200, 1962 D-19 Diesel, 1979 7010, 1957 WD45, 1950 WD, 1961 D17, Speed Patrol, D14, All crop 66 big bin, 180 diesel, 1970 170 diesel, FP80 forklift. Gleaner A



Print Page | Close Window

Forum Software by Web Wiz Forums® version 11.10 - http://www.webwizforums.com
Copyright ©2001-2017 Web Wiz Ltd. - https://www.webwiz.net