Farm Equipment - 7010 powershift

Print Page | Close Window

7010 powershift

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=132471
Printed Date: 06 Jun 2025 at 6:09pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: 7010 powershift

Posted By: allis/cattle
Subject: 7010 powershift
Date Posted: 11 Dec 2016 at 8:14am

What's the best way to warmup a powershift allis its -37 here this morning

Replies:

Posted By: DrAllis
Date Posted: 11 Dec 2016 at 8:40am

Leave it park.....shift trans into 4th gear or higher.....run engine 1500 and up.

Posted By: allis/cattle
Date Posted: 11 Dec 2016 at 8:43am

Ok perfect thank doc :)))

Posted By: darrel in ND
Date Posted: 11 Dec 2016 at 9:10am

Suddenly, I feel a whole lot warmer. Only a couple below zero here. Darrel

Posted By: MACK
Date Posted: 11 Dec 2016 at 7:58pm

Open the gate and turn cattle into hay pile. MACK

Posted By: allis/cattle
Date Posted: 11 Dec 2016 at 8:52pm

lol oh it wasnt that bad buy 2 in the afternooon it was -9 you have to remember im useing celcious

Posted By: shameless (ne)
Date Posted: 12 Dec 2016 at 4:13am

o-k....sooooo....a rough estimate, yer warmer than we are?

Posted By: shameless (ne)
Date Posted: 12 Dec 2016 at 4:15am

oh...wait....i'm thinking of kilometers....nevermind! (brain fart)

Posted By: Tbone95
Date Posted: 12 Dec 2016 at 7:27am

Not much difference between F and C in that range. -40 the temps are the same! COLD!

Posted By: allis/cattle
Date Posted: 12 Dec 2016 at 8:39am

yep -40 is cold on both scales of measurement lol

Posted By: DrAllis
Date Posted: 12 Dec 2016 at 9:07am

Always best to back tractor into shed when warmed up, so on a cold morning you drive it forward to get it out of the shed. If you notice, reverse takes more HP to get the tractor to move, and when the oil is cold, it's even worse.

Posted By: allis/cattle
Date Posted: 12 Dec 2016 at 9:23am

Yes I would love to but if I back the tractor in all I'll get in is the bale shreader and the cab I need a bigger heated shop. Right now it's just nosed into the machine shed. I was having trouble with the starter so I took it off yesterday and am getting it rebuilt that should make a big difference to starting it