CENTERFOLD DISC WANTED
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=132445
Printed Date: 23 Sep 2025 at 5:32pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: CENTERFOLD DISC WANTED
Posted By: SIMPLICITY
Subject: CENTERFOLD DISC WANTED
Date Posted: 10 Dec 2016 at 8:15am
|
HELLO LOOKING FOR ALLIS (ORANGE OR GREEN )19-22' 2500 CENTER FOLD , TEX,ARK,MISS,LA,AL EVEN FLORIDA PANHANDLE |
Replies:
Posted By: TimNearFortWorth
Date Posted: 10 Dec 2016 at 8:59am
|
Check Craig's List-Houston, two sets listed as I recall and an 18'? that looks like new. Tim |
Posted By: victoryallis
Date Posted: 10 Dec 2016 at 11:18am
|
You really don't want a center fold disc. ------------- 8030 and 8050MFWD, 7580, 3 6080's, 160, 7060, 175, heirloom D17, Deere 8760 |
Posted By: VAfarmboy
Date Posted: 10 Dec 2016 at 11:45am
He is down in the Mississippi Delta where the ground is totally flat. Centerfold disks work fine on flat ground. |
victoryallis wrote:Posted By: shameless (ne)
Date Posted: 10 Dec 2016 at 11:50am
| my 2500 center fold worked great on my flat and my hill ground! I spose I prolly should sell it, don't think i'll be using it anymore. |
Posted By: VAfarmboy
Date Posted: 10 Dec 2016 at 12:06pm
We had a Deere 220 black gang and it did fine on the flat stuff but if you got into any hill ground you practically needed a bulldozer to smooth out the ridges it would throw and the ditches it would cut. |
Posted By: shameless (ne)
Date Posted: 10 Dec 2016 at 12:16pm
| deere tried to copy the AC disk and it didn't work! they were not a good disk. |
Posted By: VAfarmboy
Date Posted: 10 Dec 2016 at 12:21pm
| I have heard the older yellow gang Deere centerfolds were even worse than the black gang ones. |
Posted By: Tenn allis
Date Posted: 10 Dec 2016 at 3:19pm
| My aunt has a 2500 about 21 ft and a 12 foot 2300 for sale in Tennessee if your interested among other ac tractors and stuff |
Posted By: CORLEWFARM
Date Posted: 10 Dec 2016 at 3:36pm
|
I'm in tennessee. Where are you located tenn allis? |
Posted By: Tenn allis
Date Posted: 10 Dec 2016 at 3:55pm
| McMinnville southeast of Nashville about 70 miles |
Posted By: allisguy.11
Date Posted: 10 Dec 2016 at 5:10pm
| first thing that went through my head when i read the topic title was… why? haha |
Posted By: jaybmiller
Date Posted: 10 Dec 2016 at 5:13pm
|
I know it's NOT the kind of centerfold I'd like to have !
------------- 3 D-14s,A-C forklift, B-112 Kubota BX23S lil' TOOT( The Other Orange Tractor) Never burn your bridges, unless you can walk on water |
Posted By: TimNearFortWorth
Date Posted: 10 Dec 2016 at 6:43pm
| SIMPLICITY, responded to your PM. 14' 2300 (fixed) and 18' wing fold 2300. Sent you tel. # from CL ad. |
Posted By: CORLEWFARM
Date Posted: 11 Dec 2016 at 7:25am
| Tenn allis sent you a pm |
Posted By: Ted J
Date Posted: 11 Dec 2016 at 5:57pm
|
DANG you THAD!!! I saw that FIRST word and thought.................ruined my whole day. Good luck on finding a disk though....  ------------- "Allis-Express" 19?? WC / 1941 C / 1952 CA / 1956 WD45 / 1957 WD45 / 1958 D-17 |
Posted By: SIMPLICITY
Date Posted: 13 Dec 2016 at 8:08pm
| THANKS FOR THE INFO I'VE RECEIVED. STILL LOOKING |
Posted By: victoryallis
Date Posted: 13 Dec 2016 at 8:18pm
One thing to remember with this crowd is if it's orange it has to be good. I would broaden your disc search. Others have made better discs. ------------- 8030 and 8050MFWD, 7580, 3 6080's, 160, 7060, 175, heirloom D17, Deere 8760 |
Posted By: MACK
Date Posted: 13 Dec 2016 at 8:51pm
| I have a Krause center fold that does a good job @ 2 mph. Any faster it makes ridges and valleys . MACK |
Posted By: SIMPLICITY
Date Posted: 20 Dec 2016 at 7:55pm
| STILL LOOKING, I KNOW THEIRS ONE OUT THERE FOR ME THAT'S WHY I'M BEATING BUSHES , JUST MAY BE SOMEONE WILL KNOW WHERE THEIRS ONE STORED IN A SHED OR JUST LAYING AROUND WAITING TO BE REBORN THANKS |
Posted By: shameless (ne)
Date Posted: 21 Dec 2016 at 4:19am
| I haven't had the chance to get back to mine yet reference in info you wanted....sorry for the delay! |