AC salvage yards
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=132276
Printed Date: 12 Aug 2025 at 9:28pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: AC salvage yards
Posted By: JVON
Subject: AC salvage yards
Date Posted: 05 Dec 2016 at 11:06pm
Does anyone have a good list of AC salvage yards? I know of a few mentioned on the site quite often, but would like to know of any more out there. Many thanks for the help! I've been reading in the site for quite a while and finally signed up. Just got my D17 series I out of mothballs and looking for some replacement pieces.
Jay
|
Replies:
Posted By: Mikez
Date Posted: 05 Dec 2016 at 11:10pm
Posted By: Dan73
Date Posted: 06 Dec 2016 at 12:28am
Welcome to the forum. I would suggest you start with the supplies page in here the sponsor of the site typically use the parts they sell themselves so quality is typically a high priority. For use parts I would recommend the classified section as a good source there is usually someone parting out something with the parts you might want.
Beyond that there is wengers of myerstown pa I have bought things from them before the service is good but you pay for it. I find they tend to be on the high side. That said i have no complaints about the parts I got there.
All States AG parts also has a good supply of used parts. I have gotten good stuff there but you have to call them. The website is often out of date on salvage and the email request hasn't worked well for me.
Hope that helps as I said I would suggest starting on the supplier page in my experience that is where you will find the best stuff from the most helpful people.
If you listed what you are looking for we could better help point you in the right direction.
|
Posted By: wayneIA
Date Posted: 06 Dec 2016 at 1:09am
|
In addition to the two yards Dan mentioned above, I've used: Eiklenborg Salvage in Aplington, IA; Meyers Tractor Salvage in Aberdeen, SD; Draper Tractor in Garfield, WA; Heitman Salvage in Durand, WI
|
Posted By: corbinstein
Date Posted: 06 Dec 2016 at 6:38am
|
not around here anymore, Storey just had a massive auction and sold it all..... I missed the auction tho...
|
Posted By: Ron Nelson
Date Posted: 06 Dec 2016 at 8:17am
|
There is Bill Deppe in Maquoketa, Iowa. Great place for used Allis parts.
|
Posted By: tbird
Date Posted: 06 Dec 2016 at 4:46pm
|
bill deppe phone no 563 652 2949 cell no 563 357 2615
|
Posted By: Skyhighballoon(MO)
Date Posted: 06 Dec 2016 at 4:49pm
Northside Salvage in Red Bud, IL. Mike
-------------
1981 Gleaner F2 Corn Plus w 13' flex
1968 Gleaner EIII w 10' & 330
1969 180 gas
1965 D17 S-IV gas
1963 D17 S-III gas
1956 WD45 gas NF PS
1956 All-Crop 66 Big Bin
303 wire baler, 716H, 712H mowers
|
Posted By: Rick143
Date Posted: 06 Dec 2016 at 6:33pm
|
L & L Parts Wells Minnesota they are honest and very reasonable. 952-290-1063
|
Posted By: JVON
Date Posted: 06 Dec 2016 at 9:32pm
|
This is all great info. Thanks for the names and phone numbers! Now it's on to figure out what to fix up first??
|
Posted By: elbyCJett
Date Posted: 07 Dec 2016 at 5:16am
Northside in Ill phone # 618 282 2455
-------------
D-14, 160, 2 - CAs, 2 - Bs, 2 Gs Roto-Baler, 82S Mower, Rake,444 baler, Kentucky
|
Posted By: slip knot
Date Posted: 07 Dec 2016 at 9:52pm
|
Bill Deppe was very helpful getting my 190XT PD working correctly again.
|
Posted By: davh
Date Posted: 08 Dec 2016 at 6:31am
|
Austin Farm Salvage 660 679 4080. Butler, Mo.
|
|