Print Page | Close Window

D12 coming togather and need a part

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=132222
Printed Date: 04 Jun 2025 at 4:04pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com


Topic: D12 coming togather and need a part
Posted By: Jeeper38
Subject: D12 coming togather and need a part
Date Posted: 04 Dec 2016 at 7:54pm
Well, My D12 is finally starting to look like something. I did rods, mains, sleeves, pistons, and had the head gone through.Got the engine put together and running Friday night.  Spent the rest of the weekend cleaning and then painting. Also, I'm looking for what I believe will be a dust cap type part that goes on each end of the bar that the upper link of the 3 pt attaches to. If anybody has that part I'd sure like to talk. I've got some good pointers from this forum a couple times through this project and just wanted to show some progress. Thanks



Replies:
Posted By: PaulB
Date Posted: 05 Dec 2016 at 11:16am
Are these what you're looking for?  These are NOS, part number 241668. PM me if you're interested.


-------------
If it was fun to pull in LOW gear, I could have a John Deere.
Real pullers don't have speed limits.
If you can't make it GO... make it SHINY


Posted By: Jeeper38
Date Posted: 05 Dec 2016 at 12:47pm
I'm not sure exactly what they look like because they have never been there. I'll take a picture of the place they go and see if anyone knows. The part number you list is shown on Agco's page as being S/N 9001 and up. Mines S/N 5301 I think.


Posted By: Bill Long
Date Posted: 05 Dec 2016 at 3:09pm
By the way that is a GREAT JOB you are doing on the D-12!
Let us see some pictures when you get it done.
Good Luck!
Bill Long


Posted By: Jeeper38
Date Posted: 06 Dec 2016 at 11:45am
I have learned that the part number I'm looking for is 231682. If anyone has this please PM me. It's NLA from Agco. Thanks



Print Page | Close Window

Forum Software by Web Wiz Forums® version 11.10 - http://www.webwizforums.com
Copyright ©2001-2017 Web Wiz Ltd. - https://www.webwiz.net