Print Page | Close Window

d15 factory three point

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=132212
Printed Date: 02 Nov 2025 at 9:41am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com


Topic: d15 factory three point
Posted By: stinsonv77
Subject: d15 factory three point
Date Posted: 04 Dec 2016 at 3:31pm
purchased a recently restored d15 series 2 and can not figure out how to control depth of equipment. it seems to vary but mostly too deep. not really sure how the two lever activator works. operators manual on the way but need to use it now





Replies:
Posted By: Butch(OH)
Date Posted: 04 Dec 2016 at 6:37pm
There is no depth control such as on most factory 3 points. You have a hold position on the lift lowet lever which is the bottom one. The top lever is the traction booster aka draft control.



Print Page | Close Window

Forum Software by Web Wiz Forums® version 11.10 - http://www.webwizforums.com
Copyright ©2001-2017 Web Wiz Ltd. - https://www.webwiz.net