433I valve clearance
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=132048
Printed Date: 31 Oct 2025 at 6:31pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: 433I valve clearance
Posted By: Chad S
Subject: 433I valve clearance
Date Posted: 30 Nov 2016 at 9:49pm
I need to adjust the valves on my repowered 170 but I don't have a manual for this engine. Think it came out of an F2. Can anyone tell me what they should be set at? Ok don't know how to rotate pic from my phone. ------------- 36 WC,41 WC,53 WD45,57 D14,65 D21,68 XT,72 XT,81 7045 |
Replies:
Posted By: DrAllis
Date Posted: 30 Nov 2016 at 10:43pm
| .017" COLD intake and exhaust. |
Posted By: injpumpEd
Date Posted: 01 Dec 2016 at 8:07am
|
Now that is how the 170/175 should have been built from the start! Sad that they could buy an outside sourced engine more cost effective than their own engine! Though the 2200(200 cid)wasn't made popular until they revised it for the 6000 series. ------------- 210 "too hot to farm" puller, part of the "insane pumpkin posse". Owner of Guenther Heritage Diesel, specializing in fuel injection systems on heritage era tractors. stock rebuilds to all out pullers! |
Posted By: Peterson
Date Posted: 01 Dec 2016 at 10:29am
|
Nice tractor!! Always wanted to do that swap on a 170/175! Tell use more about it. ------------- 7095-685I at 255hp, 8070-225HP,8050-210Hp,8030 with 155HP,220 with 670T engine with A-pump, 7580, 185 with 140HP, 2-6080's,6070, S4 D17,wd45,CA,st34 agco, S1 D17 with 3500MK2 |
Posted By: Chad S
Date Posted: 01 Dec 2016 at 12:45pm
|
Thanks DrAllis. peterson. Tractor was a gas. We used a 190 fly wheel and clutch. Fabricated an adapter of 1 3/8 in. to space engine out for the longer input shaft and had an adapter made for the front HYD pump drive. And the rest was just intake and radiator plumbing. ------------- 36 WC,41 WC,53 WD45,57 D14,65 D21,68 XT,72 XT,81 7045 |
Posted By: Chad S
Date Posted: 01 Dec 2016 at 12:48pm
 ------------- 36 WC,41 WC,53 WD45,57 D14,65 D21,68 XT,72 XT,81 7045 |
Posted By: Chad S
Date Posted: 01 Dec 2016 at 12:49pm
 ------------- 36 WC,41 WC,53 WD45,57 D14,65 D21,68 XT,72 XT,81 7045 |