Farm Equipment - 190 xt series III questions

Print Page | Close Window

190 xt series III questions

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=132038
Printed Date: 02 Jun 2025 at 9:24pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: 190 xt series III questions

Posted By: rudyk
Subject: 190 xt series III questions
Date Posted: 30 Nov 2016 at 7:41pm

Looking to trade for a 190 xt
I have one already so a little familiar with them
The one I'm looking at fired right up after sitting for a couple months.
It was fairly cold out as well 38 or so
The tractor had to warm up for 10 minutes before the hydraulics would work, after that they worked great
Any ideas
Also he had tied the drain plugs together for a equalizer tube, I'm assuming the seal between two resistors has gone bad
Any idea on repairing the seal, time it takes cost etc
Thanks for any advice

Replies:

Posted By: MACK
Date Posted: 30 Nov 2016 at 9:41pm

Check all connections between sump and hydraulic and replace front seal in hydraulic pump.

If the two oil compartments are tied togather, it needs split and replace seals. May also need the housing the PD slides into replaced. MACK