Construction and other equipment - Turbo for AllisChalmers HD3

Print Page | Close Window

Turbo for AllisChalmers HD3

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Construction and other equipment
Forum Description: everything else with orange (or yellow) paint
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=131849
Printed Date: 09 May 2024 at 4:15pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: Turbo for AllisChalmers HD3

Posted By: Sheldon
Subject: Turbo for AllisChalmers HD3
Date Posted: 26 Nov 2016 at 4:13pm

My dad had a Allis Chalmers HD3 track hoe which is now mine. i love the thing but it is under powered for the use i have for it. I'm looking for a turbo to add to the diesel engine on it's upcoming rebuild but i'm having trouble locating one. Does anyone know where I can find a turbo kit for this engine?

Replies:

Posted By: DrAllis
Date Posted: 26 Nov 2016 at 5:43pm

You're on your own. I know of no "turbo kit" available for an HD-3. Maybe a fresh engine OH along with injectors and injection pump will liven it up a bit.

Posted By: Sheldon
Date Posted: 26 Nov 2016 at 9:38pm

Thank you. I thought I had read somewhere that people were using the D15 farm tractor (Which I believe is the same engine) for antique tractor pulling and many had added turbos. I just can't find the web site again.

Posted By: Coke-in-MN
Date Posted: 26 Nov 2016 at 11:06pm

the HD4 with the 2200 engine can be turboed - same engine was used in cotton picker and there they used a turbo .

H3 is a light machine and IF you are overworking machine high HP output is going to make junk out of it quickly .

Look for a larger machine it might be cheaper in the long run .

-------------
Faith isn't a jump in the dark. It is a walk in the light. Faith is not guessing; it is knowing something.
"Challenges are what make life interesting; overcoming them is what makes life meaningful."

Posted By: farmtoybuilder
Date Posted: 27 Nov 2016 at 8:35am

As Coke said! Your better off to buying a bigger dozer! It won't stand any more power. Our 40 hp. 4wd JD tractor with loader will push more than the HD3 we have. And I hate even trying to use it anymore after using newer style Cat D4.

-------------
5 different TT-10's,5 TT-18's Terra Tigers,B-10,2 B-207's,B-110,2 B-112's,HB-112,B-210,B-212,HB212,2 Scamp's & Homilite T-10. Still hunting NICE HB-112 & anything Terra Tiger & Trailers for them.

Posted By: Sheldon
Date Posted: 27 Nov 2016 at 10:21am

Thank you all.

Posted By: Coke-in-MN
Date Posted: 27 Nov 2016 at 7:41pm

depending on which hoe is on the machine - my HD4 used a AC 650 hoe with 14' reach and 24" bucket - the weight of the hoe caused the machine to ride on rear sprockets and not on track rollers - broken axles and worn case bearings and bearing races on both rear housings - about $300 of machining on each rear case to get new bearing cups set into cases . Went through 4 axles also in time i had machine

-------------
Faith isn't a jump in the dark. It is a walk in the light. Faith is not guessing; it is knowing something.
"Challenges are what make life interesting; overcoming them is what makes life meaningful."

Posted By: allisguy.11
Date Posted: 10 Dec 2016 at 7:21am

check out Keystone turbos... just google them. they make kits for 45 gassers. I'm sure you could give them the specs and they can make up a turbo and manifold assembly for you. they may already have them. get out your pocketbook.

Posted By: Sheldon
Date Posted: 15 Dec 2016 at 8:47pm

I have e-mailed Keystone several times and have yet to receive any reply.