| Lowest model A serial#
 
 Printed From: Unofficial Allis
 Category:  Allis Chalmers
 Forum Name:  Farm Equipment
 Forum Description:  everything about Allis-Chalmers farm equipment
 URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=131732
 Printed Date: 30 Oct 2025 at 7:28pm
 Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
 
 
 Topic: Lowest model A serial#
 Posted By: Matt (Jordan,MN)
 Subject: Lowest model A serial#
 Date Posted: 23 Nov 2016 at 4:30pm
 
 
        
          | I am curious what is the lowest serial number recorded for the model A tractor. I know that #3 is still around but is there any with a lower #?  Thanks Matt 
 -------------
 Owner of Matt Scott LLC
 Specializing in NOS and used Allis Chalmers tractor & implement parts & liturature and Magneto Repair
 http://www.mattscottllc.com/
 |  
 
 Replies:
 Posted By: Butch(OH)
 Date Posted: 23 Nov 2016 at 7:17pm
 
 
        
          | Seems to me that #1 or 2 was found but can't remember for certain. Quite a few of the very early ones, say the first 50 are around. |  
 Posted By: JW in MO
 Date Posted: 23 Nov 2016 at 7:45pm
 
 
        
          | I watched as #2 and #3 were sold, well not so much watching as calling my wife and my Mother to tell them I was bringing Grandpa's A home. #2 I'm pretty sure went North across the border.  #3 had blocks welded on the front end to raise it up, I might have pictures, but don't know if it went with #2 or not.  #1 I understood is like Toto and lives in Kansas. 
 
 Cant catch spelling errors in Preview but hit that Post button and . . .
 
 -------------
 Maximum use of available resources!
 |  
 Posted By: CALEBnOK
 Date Posted: 23 Nov 2016 at 8:23pm
 
 
        
          | I want to see an A on steel |  
 Posted By: Matt (Jordan,MN)
 Date Posted: 23 Nov 2016 at 8:49pm
 
 
        
          | I knew that Ernie had 2 of them with consecutive numbers. I might know where #2 is and I know where #3 went. So I guess the first three where abouts are known. How about #4 thru 25? I should have went to Ernie's auction. I don't know why I didn't. It wasn't like I had a job to go to then. 
 -------------
 Owner of Matt Scott LLC
 Specializing in NOS and used Allis Chalmers tractor & implement parts & liturature and Magneto Repair
 http://www.mattscottllc.com/
 |  
 Posted By: CrestonM
 Date Posted: 23 Nov 2016 at 9:08pm
 
 
        
          | A buddy of mine has #7. His brother has one too, but I forget what it is. |  
 
 |