Farm Equipment - Reinstalling D14 snap coupler

Print Page | Close Window

Reinstalling D14 snap coupler

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=131724
Printed Date: 30 May 2025 at 8:38pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: Reinstalling D14 snap coupler

Posted By: Herb(GA)
Subject: Reinstalling D14 snap coupler
Date Posted: 23 Nov 2016 at 12:02pm

There must be some neat way (that I am not aware of) for reinstalling the "U shaped" SPRING-TORSION (which must be in a loaded condition) when reassembling the HOOK, SNAP COUPLER RELEASE and PIN-PIVOT to my D-14. Herb(GA)

Replies:

Posted By: wfmurray
Date Posted: 23 Nov 2016 at 12:15pm

Use a short piece of dowel rod and put through hook and spring .Put hook in place and push pin in pushing dowel rod out.Broom handle can work for a dowel.

Posted By: Hubnut
Date Posted: 23 Nov 2016 at 2:24pm

I used a large cross tip screw driver for my CA snap coupler. It isn't easy.

-------------
1940 B "Lucy"
1941 B w/ Woods L59 "Flavia"
1942 B w/ finish mower "Dick"
1941 C w/ 3-point "Maggie"
1947 C SFW w/ L306 "Trixie"
1972 314H