Print Page | Close Window

190 xt Hydraulic line leaks

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=131697
Printed Date: 30 May 2025 at 4:58pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com


Topic: 190 xt Hydraulic line leaks
Posted By: slip knot
Subject: 190 xt Hydraulic line leaks
Date Posted: 22 Nov 2016 at 8:12pm
last year I got the XT running with a new clutch and rebuilt the power director. While I had it apart I rebuilt the hydraulic controls and replaced the orings in the line connectors. Last week while loading hay I found a small stream of oil coming from the hydro controllers. Where the lines go into the connectors. These were a real pain to replace the orings and I really hate to go back in there without any assurances it will fix the problem. Are these orings "special" proprietary seals?

Is there a replacement end for these lines or do you have to replace the whole line?

I plan on keeping this machine and want to fix this issue once and for all. What would the good folks on here recommend?



Replies:
Posted By: MACK
Date Posted: 22 Nov 2016 at 9:22pm
Replace the lines with later style lines. It is a never ending job replacing Owings + a real pain.         MACK


Posted By: slip knot
Date Posted: 22 Nov 2016 at 9:46pm
are the new style lines available from AGCO? Aftermarket?

I'm not sure I want to start trying to piece together a set from junkyards.


Posted By: Lynn Marshall
Date Posted: 23 Nov 2016 at 7:33am
No aftermarket, I'd try to get a set from a 200 out of salvage.


Posted By: DrAllis
Date Posted: 23 Nov 2016 at 10:56am
Those old design lines/connections were a really bad idea. I've always thought there was some door-to-door peddler that showed up in Milwaukee one day and sold A-C a trainload of those things for pennies apiece. They sure didn't stay with them very long.



Print Page | Close Window

Forum Software by Web Wiz Forums® version 11.10 - http://www.webwizforums.com
Copyright ©2001-2017 Web Wiz Ltd. - https://www.webwiz.net