Will Gleaner E rims fit an RC
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=131666
Printed Date: 30 Oct 2025 at 11:56pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: Will Gleaner E rims fit an RC
Posted By: Jack C
Subject: Will Gleaner E rims fit an RC
Date Posted: 22 Nov 2016 at 1:23pm
|
Does anyone know if there is a lighter pressed steel combine wheel that will bolt up to an Allis RC hub? I'm thinking the WC and RC hubs would be the same. Someone said he thought the Gleaner E would, but wasn't sure.
|
Replies:
Posted By: allisorange
Date Posted: 22 Nov 2016 at 6:20pm
I do not think Gleaner E rim will fit either Tractor your talking about.
They fit WD,WD45, D17 and probably more of the D series.
John Carlson
|
Posted By: DSeries4
Date Posted: 22 Nov 2016 at 9:01pm
No. RC uses a 6 bolt hub. Gleaner E (and most other Gleaners) are 8 bolt or more.
-------------
'49 G, '54 WD45, '55 CA, '56 WD45D, '57 WD45, '58 D14, '59 D14, '60 D14, '63 D15D, '66 D15II, '66 D21II, '67 D17IV, '67 D17IVD, '67 190XTD, '73 620, '76 185, '77 175, '84 8030, '85 6080
|
Posted By: Lonn
Date Posted: 23 Nov 2016 at 6:11am
Ain't too hard to build a set from blank rims and a set of old rusted out WC spoked wheels. I've done a couple sets just setting them on the floor of our barn 20 sumtin years ago and they ran true as new. Just do a lot of measuring. Took me about 6 hours the very first time.
-------------
-- --- .... .- -- -- .- -.. / .-- .- ... / .- / -- ..- .-. -.. . .-. .. -. --. / -.-. .... .. .-.. -.. / .-. .- .--. .. ... -
Wink
I am a Russian Bot
|
|