Farm Equipment - D17 hydraulic lines

Print Page | Close Window

D17 hydraulic lines

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=131611
Printed Date: 30 May 2025 at 1:02pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: D17 hydraulic lines

Posted By: Clint5885
Subject: D17 hydraulic lines
Date Posted: 20 Nov 2016 at 9:57pm

Hey I'm new here and looking for some help. A 62 d17 gas was given to me that has sat for about 10 years, this thing is sweet! I was operating the rear lift and the stock hydraulic lines busted due to rust so ive ordered new steel lines so I can flare and replace them. Does anyone know what angle that inverted flare is and if I can use a standard flaring tool? Also can I cap the lines off in the meantime or will that cook the pump? First tractor so all this is new to me

Replies:

Posted By: DrAllis
Date Posted: 21 Nov 2016 at 7:28am

Leave both hydraulic levers down (horizontal) and keep the dipstick underneath the fuel tank on right side full and you'll do no harm.

Posted By: Sugarmaker
Date Posted: 21 Nov 2016 at 8:17am

Welcome! We will need some pictures too!:)
Regards,
Chris

-------------
D17 1958 (NFE), WD45 1954 (NFE), WD 1952 (NFE), WD 1950 (WFE), Allis F-40 forklift, Allis CA, Allis D14, Ford Jubilee, Many IH Cub Cadets, 32 Ford Dump, 65 Comet.