185 Front Spindles
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=130752
Printed Date: 22 May 2025 at 2:32pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: 185 Front Spindles
Posted By: ChrisS
Subject: 185 Front Spindles
Date Posted: 01 Nov 2016 at 12:50pm
Parts book calls out a 10 degree front spindle P/N 70270044 ($516.00) and a 12 degree front spindle P/N 70270038 ($204.00). Is this 2 degrees the camber angle? What was AC's engineering reason for the small difference and why such a price difference between the two?
Chris
|
Replies:
Posted By: JoeO(CMO)
Date Posted: 01 Nov 2016 at 1:01pm
allows a wider tire to be used on the 12 deg.
-------------
|
Posted By: ChrisS
Date Posted: 04 Nov 2016 at 9:17am
What was the standard spindle degree 10 or 12 and what was the standard tire/wheel size? How big of a tire can you go with if you have the 12 degree spindle?
Thanx
Chris
|
Posted By: Tracy Martin TN
Date Posted: 04 Nov 2016 at 9:22am
I have 11l x 15s on mine. Not sure which spindle is on it, but that is about the limit of clearance. HTH Tracy
-------------
No greater gift than healthy grandkids!
|
Posted By: Skyhighballoon(MO)
Date Posted: 04 Nov 2016 at 8:19pm
I have 10.00x16's on my 180 but the wheel dish is reversed to change the offset. No issue with spindle clearance. Mike
-------------
1981 Gleaner F2 Corn Plus w 13' flex
1968 Gleaner EIII w 10' & 330
1969 180 gas
1965 D17 S-IV gas
1963 D17 S-III gas
1956 WD45 gas NF PS
1956 All-Crop 66 Big Bin
303 wire baler, 716H, 712H mowers
|
Posted By: Eldon (WA)
Date Posted: 04 Nov 2016 at 10:38pm
Most 15" wide rims need to be reversed to work. Are you sure they aren't talking about the length? The tall spindles are 2" longer.
-------------
ALLIS EXPRESS!
This year:
|
|