Cab Doors
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=130750
Printed Date: 23 May 2025 at 5:02pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: Cab Doors
Posted By: Tbone95
Subject: Cab Doors
Date Posted: 01 Nov 2016 at 12:00pm
|
Will a cab door from an "early" 7060 (maroon belly) fit a 7045?
|
Replies:
Posted By: Dans 7080
Date Posted: 01 Nov 2016 at 12:29pm
Yes. The latches are different on the inside but it will work.
-------------
When someone tells you Nothings Impossible, Tell them to slam a revolving door
|
Posted By: Tbone95
Date Posted: 02 Nov 2016 at 2:58pm
Can anyone else confirm this? Sorry Dans, not dissing you at all, just the way I have it figured is a lot of time to get this and have it be wrong.
Thanks all....
|
Posted By: ryan(IN)
Date Posted: 02 Nov 2016 at 3:20pm
In the parts books they show different part numbers for maroon belly and black belly (>6001 s/n). The difference may just be the handle and latch on the inside. I think they would still interchange though.
-------------
ryan
1984 8070 FWA,1979 7060,1975 7040,1971 190,1960 D-17D,1957 D-14, 196? D-19G, 1975 5040,1971? 160,1994 R62
|
Posted By: Dans 7080
Date Posted: 02 Nov 2016 at 6:38pm
No problem. I usually like a few opinions too. I have a black belly 7080 door that I would get rid of. Good glass typical rust on the bottom. I'm in SWOH.
-------------
When someone tells you Nothings Impossible, Tell them to slam a revolving door
|
Posted By: WD45Diesel57
Date Posted: 02 Nov 2016 at 8:53pm
I'm putting a door off a 7040 maroon on my 7020 door frame is the same just need to change out the latch
-------------
1-B's, 2-C, 2-CA's,2-WF, 1-WC,1-G, 3-WD's, 2-WD45, 1-RC, 1-D17 Diesel, 1-D14, 2-D15,1-D17 row crop,1-D19 gas and All Crop 40,60,66,72,90 and 100
|
Posted By: Tbone95
Date Posted: 03 Nov 2016 at 6:26am
|