7010 cyl head
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=130529
Printed Date: 30 May 2025 at 4:46pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: 7010 cyl head
Posted By: Sam T-Ga
Subject: 7010 cyl head
Date Posted: 27 Oct 2016 at 5:43pm
| Anyone have a good head for sale? Getting valve job on mine and machine shop calls and said my head is cracked. Head from 185 0r 190 will work |
Replies:
Posted By: Orange Blood
Date Posted: 27 Oct 2016 at 6:16pm
|
Where is it cracked? ------------- Still in use: HD7 WC C CA WD 2-WD45 WD45LP WD45D D14 3-D17 D17LP 2-D19D D19LP 190XTD 190XTLP 720 D21 220 7020 7030 7040 7045 3-7060 Projects: 3-U UC 2-G 2-B 2-C CA 7-WC RC WDLP WF D14 D21 210 7045 N7 |
Posted By: Hurst
Date Posted: 27 Oct 2016 at 7:00pm
|
I would try to find an earlier head without the copper sleeves. I put one on my 7000 after the head came up with cracks around the injector bores and the valves. The older heads have more meat. Hurst ------------- 1979 Allis Chalmers 7000 5800 Hours |
Posted By: Sam T-Ga
Date Posted: 27 Oct 2016 at 7:31pm
| Machine shop said it was cracked at a valve seat. across head to seat, under seat and into air passage under valve. Hurst I have a 185 head on my 7000 also. |
Posted By: MACK
Date Posted: 27 Oct 2016 at 9:48pm
| Will need to change nut on bottom of injectors. MACK |
Posted By: injpumpEd
Date Posted: 28 Oct 2016 at 8:53am
Nut and the nozzle as well. ------------- 210 "too hot to farm" puller, part of the "insane pumpkin posse". Owner of Guenther Heritage Diesel, specializing in fuel injection systems on heritage era tractors. stock rebuilds to all out pullers! |
MACK wrote: