Farm Equipment - WD 45 lift cyl snap ring

Print Page | Close Window

WD 45 lift cyl snap ring

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=130456
Printed Date: 10 Sep 2025 at 9:22am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: WD 45 lift cyl snap ring

Posted By: HD6GTOM
Subject: WD 45 lift cyl snap ring
Date Posted: 25 Oct 2016 at 9:51pm

Guys, how do you get this darn thing back on the end of the cyl shaft? We did not take it off, found it in the cylinder when we took it apart. There is no way to get snap ring pliers on it. Thanks Much. Tom

Replies:

Posted By: MACK
Date Posted: 25 Oct 2016 at 10:12pm

Spread it with one pair of snapring pliers enough to get another into ends. MACK

Posted By: HD6GTOM
Date Posted: 26 Oct 2016 at 8:02am

Thanks MACK tried that but there is no way to get a pair of snap ring pliers on the ends of the ring. Cut sorta like this on the ends with no hole to put pliers into ~.

Posted By: DrAllis
Date Posted: 26 Oct 2016 at 8:39am

If that is the round wire type of ring, you might be able to sharpen it a bit to use flat tanged pliers.

Posted By: HD6GTOM
Date Posted: 28 Oct 2016 at 9:11pm

Found a pair of retaining ring pliers used to rebuild auto tranny's, should have it on right after work tomorrow.