Nelson Mufflers For D-14 & D-15
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=130383
Printed Date: 19 May 2025 at 6:35pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: Nelson Mufflers For D-14 & D-15
Posted By: DennisA (IL)
Subject: Nelson Mufflers For D-14 & D-15
Date Posted: 24 Oct 2016 at 9:19am
|
Where can I get them?
------------- Thanks & God Bless Dennis |
Replies:
Posted By: Brian F(IL)
Date Posted: 24 Oct 2016 at 10:20am
| If anyone can help Dennis, I'd also like to find one for a CA. |
Posted By: Dan73
Date Posted: 24 Oct 2016 at 10:21am
| I don't think you can. I hunted for then about a year ago now and couldn't find them. The serries 1 mulfer that stiners sells for the d15 and d17 is junk sounds all high pitch tin and is little more then a straight pipe with a bigger pipe around it and holes between the two. I ended up ordering the serries 2 mulfer they offer oval. It requires you cut a hole in the hood and that you put a mulfer adaptor pipe into the manifold but it sounds much better. Not sure how much quiter it is but it is much lower pitch and sounds good. So that was my solution to my 2 tractors they got one of the factory upgrades to serries 2 just about 60 years later. |
Posted By: Brian Jasper co. Ia
Date Posted: 24 Oct 2016 at 10:31am
|
For the B C and CA, those polished stainless mufflers have the same construction as a Nelson. I think if you check with Tony Carbaugh he has a muffler that's built like a Nelson inside but doesn't have the hood on them to go down over the manifold. Seems like he adds the hood part. I'd check with Tony and see what he can do. ------------- "Any man who thinks he can be happy and prosperous by letting the government take care of him better take a closer look at the American Indian." Henry Ford |
Posted By: Tony.Or
Date Posted: 24 Oct 2016 at 11:44am
|
We do modify a muffler to mount like a walker & nelson .. Lots of baffeles in it. Tony ------------- http://www.tonystractors.com" rel="nofollow - http://www.tonystractors.com |
Posted By: Acdiesel
Date Posted: 24 Oct 2016 at 8:26pm
|
not to knock tony, but here's a link to nelson: https://www.google.com/url?sa=t&rct=j&q=&esrc=s&source=web&cd=2&ved=0ahUKEwie_pi15fTPAhWDNj4KHV44AlcQFgguMAE&url=http%3A%2F%2Fwww.nelsonglobalproducts.com%2F&usg=AFQjCNFJJfprsJq8xj03BqgDxypedZycrg&sig2=-p3vlPQMoff1XE3Xts4LYQ" rel="nofollow - Nelson Global Products | Mufflers • Silencers • Exhaust Tube - Overview ------------- D19 Diesel,D17 Diesel SER.3 2-D14, 2-D15 SER.II WF/NF D15 SER.2 DIESEL D12 SER.I, D10 Ser.II 2-720'S D21 Ser. II Gmc,caterpillar I'm a pharmacist (farm assist) with a PHD (post hole digger) |
Posted By: DennisA (IL)
Date Posted: 24 Oct 2016 at 8:33pm
I send them an email this morning with all the model number from the B - D17IV. ------------- Thanks & God Bless Dennis |
Acdiesel wrote:Posted By: Auntwayne
Date Posted: 24 Oct 2016 at 10:00pm
|
PM Rick.
------------- Dad always said," If you have one boy, you have a man. If you have two boys, you have two boys". "ALLIS EXPRESS" |
Posted By: ironac
Date Posted: 25 Oct 2016 at 1:27am
| The ca Nelson mufflers that djs sells will also work on a d14-d15. Just have to make 2 small cuts to bend the bottom of the muffler around the manifold. You won't see them unless you take hood off. A friend of mine has a stainless one from djs on his d15. Sounds just like a original Nelson. |
Posted By: ac160
Date Posted: 25 Oct 2016 at 5:45am
It works good. I just had to cut the mounting hole out a bit for a d12. Doesn't quite sound like a Nelson, but way better than stanleys. It was worth the extra cost to look and sound similar to the original.
|
Posted By: Cernunnos
Date Posted: 25 Oct 2016 at 11:57am
|
Hey Dennis, You might want to call Nelson Global Products as they did not answer my emails last summer but responded right away when I called to get my Nelson CA muffler. They check to see if they have any on hand or when the next production run will take place. As they are a wholesaler, they had to ship it to one of their distributors. In my case, they sent it to Cummins NPower in White Bear Lake, MN but I am sure they will tell you their closest dealer to northern Illinois. ------------- 1951 CA, 1952 CA with cultivator, 20 Series 8' disc harrow, 2 bottom pick-up plow, forage blower, 2-row rear mounted drill corn planter, Allcrop grain drill, No. 80T sickle mower, MN No. 130 barge box |
Posted By: BrettPhillips
Date Posted: 29 Oct 2016 at 8:06pm
|
Dennis: I'm also interested in a couple of these. Please let us know what you find. |
Posted By: TedBuiskerN.IL.
Date Posted: 31 Oct 2016 at 8:09am
|
http://www.simplyfilter.com/05388t-nelson-global-products-muffler-p/05388t.htm
------------- Most problems can be solved with the proper application of high explosives. |
Posted By: BrettPhillips
Date Posted: 31 Oct 2016 at 8:58am
|
Ted: I'm pretty sure that the muffler in your link is for the WD/WD45 and early D17 tractors. The Nelson #04566T is the one that fits the late B, CA, D10, D12, D14, and early D15. I've run into trouble finding this one in the past. The last one I bought was one of the old style Walker mufflers which has been OK, but I don't think the quality was as good as a Nelson.
|
Posted By: TedBuiskerN.IL.
Date Posted: 31 Oct 2016 at 9:29am
|
If that was a source for WD45 Nelson mufflers, why wouldn't it also be a source for all Nelson mufflers? ------------- Most problems can be solved with the proper application of high explosives. |
Posted By: snowman(MI)
Date Posted: 31 Oct 2016 at 6:34pm
|
I'm also in the market for a muffler for a gas Series II D-15. Is there a Nelson for this? It's an oval shape. snowman(MI) ------------- 1950 WD, 1966 D-10 III, 1961 D-10 II, 1966 D-15 II Gas, A-C Minibike, 917 Hydro Mower, 917 Hydro Blower w/cab, West Michigan "Allis Express" |
Posted By: Pat the Plumber CIL
Date Posted: 31 Oct 2016 at 8:05pm
|
For some reason only the round ones are available. Have not heard of any oval "Nelson" mufflers still being produced unless you find some NOS in a box sitting somewhere ------------- You only need to know 3 things to be a plumber;Crap rolls down hill,Hot is on the left and Don't bite your fingernails 1964 D-17 SIV 3 Pt.WF,1964 D-15 Ser II 3pt.WF ,1960 D-17 SI NF,1956 WD 45 WF. |