New To Me Plow
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=130314
Printed Date: 25 Oct 2025 at 10:35am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: New To Me Plow
Posted By: ksbowhunter
Subject: New To Me Plow
Date Posted: 22 Oct 2016 at 11:39am
My soon to be ever loving wife got me an Allis plow for our anniversary and has had it hidden from me for the past 2 months. I went and picked it up today I believe it is a NO 4 but I will admit I am not very familiar when it comes to the equipment.    This last picture is a part number off the moldboard. ------------- 2-37 WC 37 wf127 37 wf130 |
Replies:
Posted By: Brian G. NY
Date Posted: 22 Oct 2016 at 2:35pm
|
That truly is an unusual anniversary gift! You must have a very unusual girl there; you must be very happy together.
|
Posted By: JW in MO
Date Posted: 22 Oct 2016 at 3:50pm
|
You made me look. Mine is just like that, made sure it was still parked out back. LOL ------------- Maximum use of available resources! |
Posted By: ksbowhunter
Date Posted: 22 Oct 2016 at 3:52pm
| Now that's funny. |
Posted By: ksbowhunter
Date Posted: 22 Oct 2016 at 3:53pm
|
Where there separate manuals for these plows? I've never used one and am looking for some information on how to set it up for my WF. ------------- 2-37 WC 37 wf127 37 wf130 |
Posted By: JW in MO
Date Posted: 22 Oct 2016 at 4:31pm
|
Hook on to it and it won't take long to figure it out. Right now it appears to be in transport position, both bottoms are set as high as they will go. If you are laying off a land, (first pass, no furrow), raise both levers as high as they will go, once you have a furrow to run in, lower the furrow bottom lever about halfway. Here is a grainy trail cam picture of me and the WC several years ago finishing plowing up some sod for a food plot. Note the position of the levers. I still have the tractor, plow and hat. http://s769.photobucket.com/user/actractorman/media/Allis%20WC%201937/bacd10be-08da-448e-a099-23cb1e093186_zpssz3nzz7f.jpg.html" rel="nofollow">  ------------- Maximum use of available resources! |
Posted By: shameless (ne)
Date Posted: 22 Oct 2016 at 7:10pm
| she's a KEEPER! |
Posted By: Gerald J.
Date Posted: 22 Oct 2016 at 7:10pm
|
309211 is the part number for a 14" R.H moldboard for a 325 bottom. It doesn't help identify the plow at all because nearly all if not all AC bottoms mount with the same two 9/16" bolts from the frame to the shank and so bottoms are interchangeable but parts are not often interchangeable between bottoms except for landsides and coulters. Details in the Knowledge Forum under AC Plows Parts 101. Gerald J. |
Posted By: ksbowhunter
Date Posted: 22 Oct 2016 at 7:15pm
Most definitely Shameless ------------- 2-37 WC 37 wf127 37 wf130 |
shameless (ne) wrote:Posted By: ksbowhunter
Date Posted: 22 Oct 2016 at 7:16pm
|
[QUOTE=Gerald J.] 309211 is the part number for a 14" R.H moldboard for a 325 bottom. It doesn't help identify the plow at all because nearly all if not all AC bottoms mount with the same two 9/16" bolts from the frame to the shank and so bottoms are interchangeable but parts are not often interchangeable between bottoms except for landsides and coulters. Details in the Knowledge Forum under AC Plows Parts 101. Gerald J. Thanks Gerald. I haven't had a chance to look at that section yet but plan to in the next few days. Nick ------------- 2-37 WC 37 wf127 37 wf130 |
Posted By: CrestonM
Date Posted: 22 Oct 2016 at 8:53pm
x2!!!!!
|
Posted By: LeonR2013
Date Posted: 23 Oct 2016 at 7:14am
| If the plow has been used very much at all the teeth for the depth levers should show at least a little wear. There's a good place to start setting the plow depth at. |
Posted By: TedBuiskerN.IL.
Date Posted: 23 Oct 2016 at 7:38pm
|
That looks like a #4 lightweight plow, probably 2-14s. I have a 2-12 similar, but with cut off steel wheels. works good behind an RC Allis. ------------- Most problems can be solved with the proper application of high explosives. |
Posted By: Bill Long
Date Posted: 23 Oct 2016 at 7:51pm
|
Ted, I think you are right. It is a #4 with no trailing wheel. Should have a long landslide on the rear bottom. We sold a lot of them and they did very good in the Maryland red rock clay soil. We used the cast moldboards. I remember driving to our Branch in Harrisburg, PA to pick up parts. I always covered the bottom of the pickup with plow shares first then put in the other parts and implements. Nice plow. Good Luck! Bill Long
|
Posted By: Ted J
Date Posted: 23 Oct 2016 at 7:58pm
|
Bill, we need you on here a lot more!! Your WEALTH of knowledge is something we miss a lot. THANKS for ALL your help AGAIN!!
------------- "Allis-Express" 19?? WC / 1941 C / 1952 CA / 1956 WD45 / 1957 WD45 / 1958 D-17 |
Posted By: ksbowhunter
Date Posted: 24 Oct 2016 at 3:07am
|
Thanks guys for all the information, I am planning on getting it in the garage in the next few weeks to tear it down and clean it up for paint. Are parts for these hard to find? I noticed the trip hub is cracked about half way around. I can repair it but if I could find another I would probably go that route. ------------- 2-37 WC 37 wf127 37 wf130 |
Posted By: davetheplowman
Date Posted: 24 Oct 2016 at 8:54pm
|
I have some NOS parts. Get me a number off of what you need. I wiil look and see if i have one. Dave ------------- D14,D15 series II,D17 series III & IV |
Posted By: ksbowhunter
Date Posted: 24 Oct 2016 at 8:56pm
Thanks Dave I plan to get started on it in the next couple of weeks. I'll get with you soon. Nick ------------- 2-37 WC 37 wf127 37 wf130 |
Posted By: jiminnd
Date Posted: 25 Oct 2016 at 8:31pm
|
Not sure of the number but I have the same plow for my WF, works great and not hard to set once you get started. ------------- 1945 C, 1949 WF and WD, 1981 185, 1982 8030, unknown D14(nonrunner) |
Posted By: Mikez
Date Posted: 26 Oct 2016 at 10:03pm
| We should have some NOS parts to if Dave doesn't have what your looking for. |
Posted By: ksbowhunter
Date Posted: 26 Oct 2016 at 10:04pm
Thanks I will be in contact when I get to that point. ------------- 2-37 WC 37 wf127 37 wf130 |
Posted By: TedBuiskerN.IL.
Date Posted: 28 Oct 2016 at 10:19am
|
I have 4 1/2 of these #4 plows. The 1/2 is NOS and never assembled. I have one that is really used up for a parts donor when I get around to putting the thing together. ------------- Most problems can be solved with the proper application of high explosives. |
Posted By: ksbowhunter
Date Posted: 29 Oct 2016 at 3:05pm
Wouldnt Happen To Have A Hub Part#309470 Would You? ------------- 2-37 WC 37 wf127 37 wf130 |