OT Fender ID
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=130259
Printed Date: 30 May 2025 at 10:22pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: OT Fender ID
Posted By: Dave (NE)
Subject: OT Fender ID
Date Posted: 20 Oct 2016 at 6:20pm
Was helping a neighbor clean out a shed and came across these green tractor fenders. Can anyone help identify what tractor they fit on? They appear to be new or near new. Fiberglass with a steel bar backing. Amazing what you come across cleaning things out, eh!     |
Replies:
Posted By: JoeM(GA)
Date Posted: 20 Oct 2016 at 6:56pm
|
kinda look like 5000 series fenders, get the part number of that shifter decal and I might can narrow it down a bit
------------- Allis Express North Georgia 41 WC,48 UC Cane,7-G's, Ford 345C TLB |
Posted By: truckerfarmer
Date Posted: 20 Oct 2016 at 10:58pm
|
Gotta agree. Looks about the same as the ones we have a work. ------------- Looking at the past to see the future. '53 WD, '53 WD45, WD snap coupler field cultivator, #53 plow,'53 HD5B dozer Duct tape.... Can't fix stupidity. But will muffle the sound of it! |
Posted By: Dave (NE)
Date Posted: 21 Oct 2016 at 11:00am
Couldn't find a part number on the shifter decal. The mph decal does mention 14.9 - 28 tires, if that would help to ID which 5000 series tractor they fit. Thanks, Dave |
JoeM(GA) wrote:Posted By: JoeM(GA)
Date Posted: 21 Oct 2016 at 12:39pm
|
Tire size covers most all of that series, look in one over the corners close, Deere almost always puts one on there somewhere ------------- Allis Express North Georgia 41 WC,48 UC Cane,7-G's, Ford 345C TLB |
Posted By: Dave (NE)
Date Posted: 21 Oct 2016 at 1:20pm
Boy, I looked the decals over close. Two of them are caution related ones, so really wouldn't expect any identifying numbers on them. The other is for the mph in each gear, and couldn't find a part number. Would there be anything on the back side somewhere that was stamped or molded in? Thanks, Dave |
Posted By: JoeM(GA)
Date Posted: 21 Oct 2016 at 3:35pm
|
Dave, been a long time since I was at Deere, you might look them over, could be some numbers on them ------------- Allis Express North Georgia 41 WC,48 UC Cane,7-G's, Ford 345C TLB |
Posted By: Dave (NE)
Date Posted: 22 Oct 2016 at 11:45am
| Joe, any idea what the value of these may be. I don't need them and someone else should get some good out of them. Tkx, Dave |
Posted By: Dave (NE)
Date Posted: 25 Oct 2016 at 1:01pm
Ok, had a neighbor looking at the fenders and he noticed that one of the decals seems to picture a back hoe bucket. Would this help to ID what the fender goes on? If this works right, here is a picture of the decal. Thanks, Dave
|
Posted By: Dans 7080
Date Posted: 25 Oct 2016 at 4:47pm
|
That decal is for a loader. ------------- When someone tells you Nothings Impossible, Tell them to slam a revolving door |
Posted By: Dave (NE)
Date Posted: 25 Oct 2016 at 4:50pm
| Oh, sure, that would make sense. |