Hauling from Southern Illinois to Northern Illinoi
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=130163
Printed Date: 02 Jun 2025 at 8:26am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: Hauling from Southern Illinois to Northern Illinoi
Posted By: DennisA (IL)
Subject: Hauling from Southern Illinois to Northern Illinoi
Date Posted: 18 Oct 2016 at 2:04pm
|
Making a run from Edwardsville Illinois to Northern Illinois tomorrow. Anybody need anything hauled let me know. Thanks ------------- Thanks & God Bless Dennis |
Replies:
Posted By: DennisA (IL)
Date Posted: 18 Oct 2016 at 2:05pm
|
Will be making that run tomorrow on the 19th ------------- Thanks & God Bless Dennis |
Posted By: den/southern illinoi
Date Posted: 18 Oct 2016 at 3:17pm
|
Where you going in Evansville (Illinois)? I went to grade school there. Den ------------- Own 4 wheel 20, 2-5015, 5020 and associated equipment and 2 electric forklifts. |
Posted By: Dave H
Date Posted: 18 Oct 2016 at 7:25pm
|
i grew up in Chester and kicked around Evansville some. Mom worked at the shoe factory there in the "good ole days" So where in the hey is Ridott? |
Posted By: Pat the Plumber CIL
Date Posted: 18 Oct 2016 at 9:48pm
|
I 'll buy you lunch if you are by Springfield around noon ------------- You only need to know 3 things to be a plumber;Crap rolls down hill,Hot is on the left and Don't bite your fingernails 1964 D-17 SIV 3 Pt.WF,1964 D-15 Ser II 3pt.WF ,1960 D-17 SI NF,1956 WD 45 WF. |
Posted By: EPALLIS
Date Posted: 18 Oct 2016 at 10:09pm
|
Just curious, when you travel to "northern IL" is that close to Galena? Thanks. |
Posted By: DennisA (IL)
Date Posted: 18 Oct 2016 at 10:18pm
|
It can be. If you need something delivered let me know. I have decided not to go back to work for "the man" but instead work for myself as a truck for hire. Corporate America is all screwed up. ------------- Thanks & God Bless Dennis |
Posted By: EPALLIS
Date Posted: 18 Oct 2016 at 10:30pm
| Good info to know. Filed for future reference. Thanks! |
Posted By: DennisA (IL)
Date Posted: 18 Oct 2016 at 10:33pm
I live about 2hrs East of Galena. ------------- Thanks & God Bless Dennis |
EPALLIS wrote:Posted By: Brian Jasper co. Ia
Date Posted: 19 Oct 2016 at 11:27am
|
I'll vouch for Dennis. He hauled my E Gleaner for a good price. If I need something big hauled again I have your number. Thanks again. Oh BTW on your 7.3 there are very few electronics on them. If it's not hitting on all 8, swap out your valve cover gaskets for Dormans from Napa Car Quest O Reilly. The originals have a wire harness that the retainer tabs will break or deform if someone didn't put the wedges back in them. The Dorman gaskets have the under valve cover harness permanently attached so that never becomes a problem again. From there I would recommend you buy a new Cam position sensor and keep it in the glove box along with a 10mm deep well 1/4" ratchet. Another thing to check is the IPR connector on your high pressure oil pump. That connector likes to rot and cause a no start or stall like the cam sensor will. ------------- "Any man who thinks he can be happy and prosperous by letting the government take care of him better take a closer look at the American Indian." Henry Ford |
Posted By: DennisA (IL)
Date Posted: 19 Oct 2016 at 8:20pm
Thanks Brain. http://s161.photobucket.com/user/caallis/media/E%20Gleaner_zpsnfuacw1s.jpg.html" rel="nofollow">  ------------- Thanks & God Bless Dennis |