It's Alive (again)!
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=130123
Printed Date: 02 Jun 2025 at 6:04am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: It's Alive (again)!
Posted By: DSeries4
Subject: It's Alive (again)!
Date Posted: 17 Oct 2016 at 4:58pm
|
After a year long hiatus my new and improved 190XT roared to life today. Got it back from getting rebuilt in May and finally got it to a point where I could run it. It has a Reliance major overhaul kit with AGCO rings, Reliance valve train, brand new turbo from A&I, a couple of thousand spent on head work and welding/grinding on the crank shaft, rebuilt Roosa Master pump set 10% over stock and new injector tips. You didn't hear it before. Needed ether to start, it sounded poor and only mustered 77 hp on the dyno before. Sounds pretty good now, don't you think? http://i526.photobucket.com/albums/cc350/szalmyr/190XT/MOV04452_zpswrq9gp4k.mp4" rel="nofollow"> Here is the temporary set up. Crude but effective. Next big task is pulling the wheel centers to change the axle seals. I'd like to have it all finished and together to do some cultivating in the spring, and put it back on the dyno at next summer's show. http://s526.photobucket.com/user/szalmyr/media/190XT/DSC04447_zpsao4hlwf1.jpg.html" rel="nofollow">  ------------- '49 G, '54 WD45, '55 CA, '56 WD45D, '57 WD45, '58 D14, '59 D14, '60 D14, '61 D15D, '66 D15II, '66 D21II, '67 D17IV, '67 D17IVD, '67 190XTD, '73 620, '76 185, '77 175, '84 8030, '85 6080 |
Replies:
Posted By: Beirnesy
Date Posted: 17 Oct 2016 at 5:23pm
|
looks very nice, keep up the good work ,and keep us updated ! ------------- 1969 220,1967 190DXT,1968 190DXT, LGT's 710,,716 |
Posted By: Calvin Schmidt
Date Posted: 18 Oct 2016 at 5:59am
|
Looks like you've been working since I was there. It's a good feeling when they run again. ------------- Nothing is impossible if it is properly financed |
Posted By: Hubert (Ga)engine7
Date Posted: 18 Oct 2016 at 7:05am
|
Looking good!
------------- Just an old country boy saved by the grace of God. |
Posted By: Stan IL&TN
Date Posted: 18 Oct 2016 at 7:17am
|
I see a major problem and the problem is its not sitting in my shed. Looks great!!!  ------------- 1957 WD45 dad's first AC 1968 one-seventy 1956 F40 Ferguson |
Posted By: WD45
Date Posted: 18 Oct 2016 at 5:30pm
|
Myron you have done a great job restoring your 190XT. Congratulations. ------------- Fred Dunlop, G,B,CA, WC,WF, 3 WD45`s,gas, diesel and LP,U,D10 series III, D12,D14,D15 SERIES II,D17 Series IV in Gas and Diesel ,D19 GAS and D21,170 185,210 ,220 an I-600 8070 fwd, 716H and 1920H |
Posted By: DSeries4
Date Posted: 18 Oct 2016 at 8:32pm
Thanks Fred, it's not finished yet. There is still lots to do. It all takes time. Being laid off for 6 months earlier this year is the only reason the tractor is this far along. I don't have as much free time now that I am back at work. ------------- '49 G, '54 WD45, '55 CA, '56 WD45D, '57 WD45, '58 D14, '59 D14, '60 D14, '61 D15D, '66 D15II, '66 D21II, '67 D17IV, '67 D17IVD, '67 190XTD, '73 620, '76 185, '77 175, '84 8030, '85 6080 |
WD45 wrote:Posted By: JohnCO
Date Posted: 18 Oct 2016 at 8:49pm
|
Kind of a trade off, less time, more money.
------------- "If at first you don't succeed, get a bigger hammer" Allis Express participant |